10 material differences · fewer than 12
Tractor oneLandini R-7860 (DT) TL-20 N/M (TL-20 DT/M)1988–2000No measured PTO figureTractor twoWHITE 64101998–2001No measured PTO figure
Which should you choose?
Read our verdict on the R-7860 (DT) TL-20 N/M (TL-20 DT/M) and the 6410 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | R-7860 (DT) TL-20 N/M (TL-20 DT/M) | 6410 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 70.0 hp | 70.0 hp | — |
| Engine declared | Perkins LD 4.236 | CUMMINS B 3.9 T | differs |
| Displacement declared | 3.87 L | 3.93 L | — |
| Maximum torque declared | 195 lb·ft · 264 N·m | 235 lb·ft · 319 N·m | +21% 6410 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Dry and air-cooled OMG double clutch | Pedal operated dry single disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.8 gpm · 37.2 L/min | 10.6 gpm · 40.1 L/min | +8% 6410 |
| Pressure declared | 2,756 psi · 190 bar | 3,046 psi · 210 bar | +11% 6410 |
| Three-point lift, at the coupling points declared | 4,698 lb · 2,131 kg | 3,351 lb · 1,520 kg | +40% R-7860 (DT) TL-20 N/M (TL-20 DT/M) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,305 lb · 2,860 kg | 7,868 lb · 3,569 kg | +25% 6410 |
| Wheelbase declared | 89.8 in · 2,281 mm | 96.0 in · 2,438 mm | +7% 6410 |
| Length declared | 146.1 in · 3,710 mm | 161.0 in · 4,089 mm | +10% 6410 |
| Width declared | 78.3 in · 1,990 mm | 78.0 in · 1,981 mm | — |
| Ground clearance declared | 20.3 in · 515 mm | — | — |
| Turning radius, braked declared | 13.0 ft · 3.96 m | — | — |
| Fuel tank declared | 90.9 qt · 86.0 L | 147.9 qt · 140.0 L | +63% 6410 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) sources
- Source: Traktorenlexikon, “Landini 7860”
- Source: Traktorenlexikon, “Massey Ferguson MF 373”
WHITE 6410 sources
- Source: Traktorenlexikon, “AGCO-White 6410”
- Source: Traktorenlexikon, “White 6410”