- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1988–2000
WhichTractor size, not the maker’s category
Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) Hydraulics & PTO specs
11 hydraulics and PTO values on record for the R-7860 (DT) TL-20 N/M (TL-20 DT/M).
Engine power, claimed · gross or net not stated
70.0 hp
52.2 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Landini 7860”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a R-7860 (DT) TL-20 N/M (TL-20 DT/M) lift?
A R-7860 (DT) TL-20 N/M (TL-20 DT/M) lifts 4,698 lb (2,131 kg) at the lower-link ends.
| Pump flow | 9.8 gpm · 37.2 L/min |
|---|---|
| Steering pump flow | 6.6 gpm · 24.8 L/min |
| Hydraulic pressure | 2,756 psi · 190 bar |
| Rear remote valves | 2 |
| Lift capacity at ball ends | 4,698 lb · 2,131 kg |
Source · Traktorenlexikon, “Landini 7860”
What PTO does a R-7860 (DT) TL-20 N/M (TL-20 DT/M) have?
A R-7860 (DT) TL-20 N/M (TL-20 DT/M) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,944 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines (Form-1) |
Source · Traktorenlexikon, “Landini 7860”
Sources and how this page was built
11 hydraulics and PTO values from Traktorenlexikon, “Landini 7860”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Landini 7860 — CC BY-SA 4.0, WIKIBOOKS-TL-113006 · revision 991537. Wikibooks contributors (Traktorenlexikon). Original document