AGCO-ALLIS 5660 vs Landini 6060 (DT) TL-39 N/K (TL-39 DT/K)

9 material differences · fewer than 12

Tractor one

1994–1999

No measured PTO figure

Tractor two

1993–2000

No measured PTO figure

Which should you choose?

Read our verdict on the 5660 and the 6060 (DT) TL-39 N/K (TL-39 DT/K) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 5660 and Landini 6060 (DT) TL-39 N/K (TL-39 DT/K), field by field
Field	5660	6060 (DT) TL-39 N/K (TL-39 DT/K)	Gap
Engine
Engine power, claimed claimed	57.3 hp	57.3 hp	—
Engine declared	S.L.H. 1000.3 AT	Perkins AT 3.152-4	differs
Displacement declared	3.00 L	2.50 L	+20% 5660
Maximum torque declared	137 lb·ft · 186 N·m	155 lb·ft · 210 N·m	+13% 6060 (DT) TL-39 N/K (TL-39 DT/K)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry SAME double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.5 gpm · 36.0 L/min	9.9 gpm · 37.6 L/min	—
Pressure declared	1,305 psi · 90 bar	2,756 psi · 190 bar	+111% 6060 (DT) TL-39 N/K (TL-39 DT/K)
Three-point lift at ends declared	—	4,427 lb · 2,008 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	4,993 lb · 2,265 kg	5,291 lb · 2,400 kg	+6% 6060 (DT) TL-39 N/K (TL-39 DT/K)
Wheelbase declared	82.9 in · 2,106 mm	83.7 in · 2,126 mm	—
Length declared	141.3 in · 3,589 mm	139.4 in · 3,540 mm	—
Width declared	72.6 in · 1,844 mm	75.8 in · 1,925 mm	—
Height declared	88.5 in · 2,248 mm	93.3 in · 2,370 mm	+5% 6060 (DT) TL-39 N/K (TL-39 DT/K)
Ground clearance declared	19.7 in · 500 mm	19.3 in · 490 mm	—
Turning radius, braked declared	9.5 ft · 2.90 m	11.7 ft · 3.57 m	+23% 6060 (DT) TL-39 N/K (TL-39 DT/K)
Fuel tank declared	60.2 qt · 57.0 L	90.9 qt · 86.0 L	+51% 6060 (DT) TL-39 N/K (TL-39 DT/K)

Source

Source