DEUTZ-ALLIS 6260 vs Landini 6060 (DT) TL-39 N/K (TL-39 DT/K)

10 material differences · fewer than 12

Tractor one

1986–1990

No measured PTO figure

Tractor two

1993–2000

No measured PTO figure

Which should you choose?

Read our verdict on the 6260 and the 6060 (DT) TL-39 N/K (TL-39 DT/K) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 6260 and Landini 6060 (DT) TL-39 N/K (TL-39 DT/K), field by field
Field	6260	6060 (DT) TL-39 N/K (TL-39 DT/K)	Gap
Engine
Engine power, claimed claimed	57.3 hp	57.3 hp	—
Engine declared	KHD F3L 913	Perkins AT 3.152-4	differs
Displacement declared	3.06 L	2.50 L	+22% 6260
Maximum torque declared	144 lb·ft · 195 N·m	155 lb·ft · 210 N·m	+8% 6060 (DT) TL-39 N/K (TL-39 DT/K)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Hydraulics & hitch
Pump flow declared	12.5 gpm · 47.5 L/min	9.9 gpm · 37.6 L/min	+26% 6260
Pressure declared	—	2,756 psi · 190 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	4,427 lb · 2,008 kg	+20% 6260
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,460 lb · 2,930 kg	5,291 lb · 2,400 kg	+22% 6260
Maximum permissible mass declared	11,023 lb · 5,000 kg	—	—
Wheelbase declared	79.2 in · 2,012 mm	83.7 in · 2,126 mm	+6% 6060 (DT) TL-39 N/K (TL-39 DT/K)
Length declared	143.3 in · 3,640 mm	139.4 in · 3,540 mm	—
Width declared	84.2 in · 2,139 mm	75.8 in · 1,925 mm	+11% 6260
Height declared	97.6 in · 2,480 mm	93.3 in · 2,370 mm	—
Ground clearance declared	18.0 in · 457 mm	19.3 in · 490 mm	+7% 6060 (DT) TL-39 N/K (TL-39 DT/K)
Turning radius, braked declared	11.8 ft · 3.60 m	11.7 ft · 3.57 m	—
Fuel tank declared	79.3 qt · 75.0 L	90.9 qt · 86.0 L	+15% 6060 (DT) TL-39 N/K (TL-39 DT/K)

Source

Source