• WhichTractor size: Standard-size
  • Lab tested ×1
  • 1997–1998

It sits on the standard-size/high-power boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

John Deere 8100 T Full specifications

John Deere-PowerTech 6.081 HRW-10 six-cylinder diesel or John Deere 6081HRW10. The manufacturer claimed 182.6 horsepower. The only laboratory test on record is of one version: OECD Test 1780 measured 178.8 hp at the PTO of the 8100T (Rubber tracklaying tractor).

Engine power, claimed · gross or net not stated

182.6 hp

136.2 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “John Deere 8100T”, claimed

Weight
24,471 lb
3-point lift
15,763 lb
Hyd. flow
31.1 gpm
Top speed
18.6 mph

John Deere 8100 T specs: key facts

  • The John Deere 8100 T was built from 1997 to 1998.

  • Only one version of the John Deere 8100 T has a laboratory test on record: the 8100T (Rubber tracklaying tractor) produced 133.3 kW (178.8 hp) at the PTO, measured on OECD Test 1780.Source 1

  • The John Deere 8100 T has a claimed engine power (gross or net not stated) of 136.2 kW (182.6 hp); it has no measured PTO figure.

  • The John Deere 8100 T is a tracked machine.Source 1

  • The John Deere 8100 T has a John Deere-PowerTech 6.081 HRW-10 engine, a 6-cylinder 8.13 L diesel unit.

  • The John Deere 8100 T weighs 11,100 kg (24,471 lb) unladen.

  • The John Deere 8100 T has an independent rear PTO running at 1000 rpm.

  • The three-point hitch of the John Deere 8100 T lifts 7,150 kg (15,763 lb) at the lower-link ends.

  • The hydraulic pump of the John Deere 8100 T delivers 117.7 L/min (31.1 gpm).

Source · Traktorenlexikon, “John Deere 8100T”

How much horsepower does an 8100 T have?

The only laboratory test on record is of one version. OECD Test 1780 measured 178.8 hp at the PTO of the 8100T (Rubber tracklaying tractor). For the 8100 T as a whole the figure is the 182.6 hp claimed for the engine, which is not power at the shaft.

Engine, claimed (gross/net not stated)
182.6 hp

Sources · Traktorenlexikon, “John Deere 8100T”; OECD test report 1780, 1998

What engine is in an 8100 T?

An 8100 T has a John Deere-PowerTech 6.081 HRW-10, a 6-cylinder 8.13 L diesel engine. 8100T (Rubber tracklaying tractor) tractors have a John Deere 6081HRW10.

Engine — 8100 T engine specifications
Make & modelJohn Deere-PowerTech 6.081 HRW-10
Cylinders6, liquid-cooled
Displacement496.2 ci · 8.13 L
Max torque568 lb·ft · 770 N·m @ 1,051 rpm
Electrical system12 V

Source · Traktorenlexikon, “John Deere 8100T”

How much will an 8100 T lift, and what is its hydraulic flow?

An 8100 T lifts 15,763 lb (7,150 kg) at the lower-link ends of its Category 3 three-point hitch.

Hydraulics & PTO — 8100 T hydraulics and PTO specifications
SystemClosed centre, load sensingSource 1
Pump flow31.1 gpm · 117.7 L/min
Pressure3,379 psi · 233 bar
Hitch categoryCategory 3
Lift at ends15,763 lb · 7,150 kg
Rear PTOIndependent, engine-driven, 1000 rpmEngages under load
PTO shaft1 3/8"- 20 teilig

Source · Traktorenlexikon, “John Deere 8100T”

What transmission does an 8100 T have?

Transmission specifications for the 8100 T are below.

Transmission — 8100 T transmission specifications
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “John Deere 8100T”

How much does an 8100 T weigh?

An 8100 T weighs 24,471 lb (11,100 kg) unladen.

Weights & dimensions — 8100 T weights and dimensions
Unladen weight24,471 lb · 11,100 kg
Wheelbase89.0 in · 2,260 mm
Length216.0 in · 5,487 mm
Width102.0 in · 2,591 mm
Height123.4 in · 3,135 mm
Ground clearance14.2 in · 360 mm
Front track60.0–88.0 in · 1,524–2,235 mmWikibooks gives one track for both axles
Rear track60.0–88.0 in · 1,524–2,235 mmWikibooks gives one track for both axles

Source · Traktorenlexikon, “John Deere 8100T”

How much fuel does an 8100 T burn per hour?

Measured on OECD Test 1780 (tested as the 8100T (Rubber tracklaying tractor)), at each condition the laboratory recorded.

Cost per hour = fuel used per hour × your fuel price (per litre, or per US gallon for the gal/h figure).

Fuel use measured on OECD Test 1780
Test conditionFuel per hour
Maximum PTO powerPTO 133.3 kW (178.8 hp) at 916 rpm37.69 L/h 9.96 gal/h
Rated engine speedPTO 120.9 kW (162.1 hp) at 1,007 rpm37.02 L/h 9.78 gal/h
Standard PTO speedPTO 120.9 kW (162.1 hp) at 1,007 rpm37.02 L/h 9.78 gal/h
75% load, 50% loadNot on record for this test

Source · OECD Test 1780

Which tractors compare with an 8100 T?

Within 10% of its 182.6 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is an 8100 T two-wheel drive or four-wheel drive?

The John Deere 8100 T is a tracked machine.

What PTO does an 8100 T have?

An 8100 T has a independent 1000 rpm rear PTO on a 1 3/8"- 20 teilig shaft.

Where this page comes from

Compiled from OECD tractor test report 1780; and Traktorenlexikon, “John Deere 8100T”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 2/1 780: John Deere 8100T — Licence not stated by the publisher; facts cited, OECD-1780 · published 1998-09-22 · retrieved 2026-09-14. OECD. Original document
  2. Traktorenlexikon: John Deere 8100TCC BY-SA 4.0, WIKIBOOKS-TL-106319 · revision 876393. Wikibooks contributors (Traktorenlexikon). Original document