• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 2003–2011

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

Massey Ferguson 6495A specs: hp, weight, years

SISU-Power 66.253 ETA six-cylinder diesel. The manufacturer claimed 182.6 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

182.6 hp

136.2 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 6495”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
13,889 lb
Hyd. flow
29.1 gpm
Top speed
24.9–31.1 mph

Massey Ferguson 6495A specs: key facts

  • The Massey Ferguson 6495A was built from 2003 to 2011.

  • The Massey Ferguson 6495A has a claimed engine power (gross or net not stated) of 136.2 kW (182.6 hp); it has no measured PTO figure.

  • The Massey Ferguson 6495A was offered in two-wheel-drive and four-wheel-drive versions.

  • The Massey Ferguson 6495A has a SISU-Power 66.253 ETA engine, a 6-cylinder 6.60 L diesel unit.Source 2

  • The Massey Ferguson 6495A weighs 6,300 kg (13,889 lb) unladen.

  • The Massey Ferguson 6495A has an independent rear PTO running at 540 rpm / 1000 rpm.

  • The hydraulic pump of the Massey Ferguson 6495A delivers 110.0 L/min (29.1 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 6495”

How does the 6495A compare with its class?

  • Worth knowing:

    An unladen mass of 6,300 kg is low for its class — 15% below the median of 7,421 kg across the 134 machines within 10% of its power that hold this figure.

  • Limitation:

    The power figure is a manufacturer claim, not a measurement. No laboratory test report exists for this machine. Of the 134 tractors within 10% of its power, 13% carry one.

Derived by WhichTractor from 134 comparable records. How we work this out

Illustration of the 2003–2011 Massey Ferguson MF 6495 A, a 183 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 6495A have?

The only figure for the 6495A is 182.6 hp (136.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
182.6 hp

Source · Traktorenlexikon, “Massey Ferguson MF 6495”

What engine is in a 6495A?

A 6495A has a SISU-Power 66.253 ETA, a 6-cylinder 6.60 L diesel engine.

Engine — 6495A engine specifications
Make & modelSISU-Power 66.253 ETA
Cylinders6, liquid-cooledSource 1
Displacement402.5 ci · 6.60 L
Electrical system12 VSource 1

Source · Traktorenlexikon, “Massey Ferguson MF 7485”

How much will a 6495A lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 6495A are below.

Hydraulics & PTO — 6495A hydraulics and PTO specifications
Pump flow29.1 gpm · 110.0 L/min
Pressure3,336 psi · 230 bar
Rear PTOIndependent, engine-driven, 540 rpm / 1000 rpmEngages under load

Source · Traktorenlexikon, “Massey Ferguson MF 6495”

What transmission does a 6495A have?

Transmission specifications for the 6495A are below.

Transmission — 6495A transmission specifications
ClutchElectrohydraulically operated wet VALEO multi-disc clutch
SteeringHydrostatic DANFOSS steering
Top speed24.9–31.1 mph · 40–50 km/hthe article lists alternatives

Source · Traktorenlexikon, “Massey Ferguson MF 6495”

How much does a 6495A weigh?

A 6495A weighs 13,889 lb (6,300 kg) unladen.

Weights & dimensions — 6495A weights and dimensions
Unladen weight13,889 lb · 6,300 kgtwo-wheel-drive version
Wheelbase120.1 in · 3,050 mmtwo-wheel-drive version
Length196.4 in · 4,989 mm
Width81.5–100.4 in · 2,071–2,550 mm
Height121.9 in · 3,095 mm
Ground clearance17.7 in · 450 mm
Front track60.6–91.7 in · 1,538–2,330 mmtwo-wheel-drive version
Rear track61.7–79.1 in · 1,567–2,008 mm

Source · Traktorenlexikon, “Massey Ferguson MF 6495”

What oil does a 6495A take, and how much?

A 6495A engine takes 22.0 qt (20.8 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

6495A fluid capacities, grades and service intervals
SystemCapacity
Engine oil22.0 qt · 20.8 LSource: Traktorenlexikon, “Massey Ferguson MF 6495” · single source, not independently verified
Front axle9.0 qt · 8.5 LSource: Traktorenlexikon, “Massey Ferguson MF 6495” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 6495A?

Within 10% of its 182.6 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Massey Ferguson 6495A

Is a 6495A two-wheel drive or four-wheel drive?

The Massey Ferguson 6495A was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 6495A have?

A 6495A has a independent 540 rpm / 1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Massey Ferguson MF 7485”; and Traktorenlexikon, “Massey Ferguson MF 6495”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 6495 — CC BY-SA 4.0, WIKIBOOKS-TL-87467 · revision 992266. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Massey Ferguson MF 7485 — CC BY-SA 4.0, WIKIBOOKS-TL-71730 · revision 858305. Wikibooks contributors (Traktorenlexikon). Original document