10 material differences · fewer than 12
Tractor oneJohn Deere 8100 T1997–1998No measured PTO figureTractor twoMassey Ferguson MF 74952004–2012No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (62%); the drive differs (Tracks; 4WD); they were not built in overlapping years (1997–1998; 2004–2012); the 8100 T is on tracks, not an alternative to an ordinary tractor. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 8100 T | MF 7495 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 182.6 hp | 182.6 hp | — |
| Engine declared | John Deere-PowerTech 6.081 HRW-10 | SISU-Power 66.253 ETA | differs |
| Displacement declared | 8.13 L | 6.60 L | +23% 8100 T |
| Maximum torque declared | 568 lb·ft · 770 N·m | 542 lb·ft · 735 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | 31.1 gpm · 117.7 L/min | 32.2 gpm · 122.0 L/min | — |
| Pressure declared | 3,379 psi · 233 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 24,471 lb · 11,100 kg | 15,146 lb · 6,870 kg | +62% 8100 T |
| Maximum permissible mass declared | — | 26,455 lb · 12,000 kg | — |
| Wheelbase declared | 89.0 in · 2,260 mm | 118.4 in · 3,007 mm | +33% MF 7495 |
| Length declared | 216.0 in · 5,487 mm | 200.0 in · 5,080 mm | +8% 8100 T |
| Width declared | 102.0–109.3 in · 2,591–2,775 mm | 100.4 in · 2,550 mm | differs |
| Height, over the cab declared | 123.4 in · 3,135 mm | 122.0 in · 3,100 mm | — |
| Ground clearance declared | 14.2 in · 360 mm | 18.9 in · 480 mm | +33% MF 7495 |
| Fuel tank declared | 519.9 qt · 492.0 L | 401.5 qt · 380.0 L | +29% 8100 T |
John Deere 8100 T sources
Source
- Source: Traktorenlexikon, “John Deere 8100T”
- Source: OECD test report 1780, 1998
Massey Ferguson MF 7495 sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 7495”
- Source: Traktorenlexikon, “Massey Ferguson MF 7485”