WhichTractor
  • Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 1999–2002

It sits on the standard-size/high-power boundary, so either size is a fair description. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson 8250A specs: hp, weight, years

VALMET 634 DSBAE six-cylinder diesel. The manufacturer claimed 182.6 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

182.6 hp

136.2 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 8250”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
16,480 lb
3-point lift
19,334 lb
Hyd. flow
30.9 gpm
Top speed
24.9 mph

Massey Ferguson 8250A specs: key facts

  • The Massey Ferguson 8250A was built from 1999 to 2002.

  • The Massey Ferguson 8250A has a claimed engine power (gross or net not stated) of 136.2 kW (182.6 hp); it has no measured PTO figure.

  • The Massey Ferguson 8250A was offered in two-wheel-drive and four-wheel-drive versions.

  • The Massey Ferguson 8250A has a VALMET 634 DSBAE engine, a 6-cylinder 7.37 L diesel unit.

  • The Massey Ferguson 8250A weighs 7,475 kg (16,480 lb) unladen.

  • The Massey Ferguson 8250A has a rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Massey Ferguson 8250A lifts 8,770 kg (19,334 lb) at the lower-link ends.

  • The hydraulic pump of the Massey Ferguson 8250A delivers 116.8 L/min (30.9 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 8250”

How does the 8250A compare with its class?

  • Limitation:

    The power figure is a manufacturer claim, not a measurement. No laboratory test report exists for this machine. Of the 134 tractors within 10% of its power, 13% carry one.

Derived by WhichTractor from 134 comparable records. How we work this out

Illustration of the 1999–2002 Massey Ferguson MF 8250 A, a 183 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does an 8250A have?

The only figure for the 8250A is 182.6 hp (136.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
182.6 hp

Source · Traktorenlexikon, “Massey Ferguson MF 8250”

What engine is in an 8250A?

An 8250A has a VALMET 634 DSBAE, a 6-cylinder 7.37 L diesel engine.

Engine — 8250A engine specifications
Make & modelVALMET 634 DSBAE
Cylinders6, liquid-cooled
Displacement449.4 ci · 7.37 L
Max torque519 lb·ft · 703 N·m @ 1,227 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Massey Ferguson MF 8250”

How much will an 8250A lift, and what is its hydraulic flow?

An 8250A lifts 19,334 lb (8,770 kg) at the lower-link ends.

Hydraulics & PTO — 8250A hydraulics and PTO specifications
Pump flow30.9 gpm · 116.8 L/min
Pressure3,336 psi · 230 bar
Lift at ends19,334 lb · 8,770 kg
Rear PTO540/1000 rpm @ 1,993 engine rpm
PTO shaft1 3/8"- 6 splines or 1 3/8"- 21 part

Source · Traktorenlexikon, “Massey Ferguson MF 8250”

What transmission does an 8250A have?

Transmission specifications for the 8250A are below.

Transmission — 8250A transmission specifications
ClutchPedal operated hydraulic VALEO multi-plate clutch
BrakesHydraulically operated wet Girling full disc brake acting on differential side shafts
SteeringHydrostatic DANFOSS steering with double-acting steering cylinders
Top speed24.9 mph · 40 km/h

Source · Traktorenlexikon, “Massey Ferguson MF 8250”

How much does an 8250A weigh?

An 8250A weighs 16,480 lb (7,475 kg) unladen.

Weights & dimensions — 8250A weights and dimensions
Unladen weight16,480 lb · 7,475 kgtwo-wheel-drive version
Maximum permissible mass26,455 lb · 12,000 kg
Wheelbase121.5 in · 3,087 mmtwo-wheel-drive version
Length198.8 in · 5,050 mm
Width84.2–98.4 in · 2,138–2,500 mm
Height126.0 in · 3,200 mm
Ground clearance21.7 in · 550 mm
Front track64.8–88.6 in · 1,645–2,250 mmtwo-wheel-drive version
Rear track63.4–74.8 in · 1,610–1,900 mm

Source · Traktorenlexikon, “Massey Ferguson MF 8250”

What oil does an 8250A take, and how much?

An 8250A engine takes 20.1 qt (19.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

8250A fluid capacities, grades and service intervals
SystemCapacity
Engine oil20.1 qt · 19.0 LSource: Traktorenlexikon, “Massey Ferguson MF 8250” · single source, not independently verified
Hydraulic84.5 qt · 80.0 LSource: Traktorenlexikon, “Massey Ferguson MF 8250” · single source, not independently verified
Front axle12.4 qt · 11.7 LSource: Traktorenlexikon, “Massey Ferguson MF 8250” · single source, not independently verified
Cooling system31.4 qt · 29.7 LSource: Traktorenlexikon, “Massey Ferguson MF 8250” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with an 8250A?

Within 10% of its 182.6 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Massey Ferguson 8250A

Is an 8250A two-wheel drive or four-wheel drive?

The Massey Ferguson 8250A was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does an 8250A have?

An 8250A has a 540/1000 rpm rear PTO on a 1 3/8"- 6 splines or 1 3/8"- 21 part shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Massey Ferguson MF 8250”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 8250 — CC BY-SA 4.0, WIKIBOOKS-TL-87687 · revision 992233. Wikibooks contributors (Traktorenlexikon). Original document