11 material differences · fewer than 12
Tractor oneJohn Deere 8100 T1997–1998No measured PTO figureTractor twoMassey Ferguson MF 6495 A2003–2011No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (76%); the drive differs (Tracks; Two-wheel or four-wheel drive); they were not built in overlapping years (1997–1998; 2003–2011); the 8100 T is on tracks, not an alternative to an ordinary tractor. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 8100 T | MF 6495 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 182.6 hp | 182.6 hp | — |
| Engine declared | John Deere-PowerTech 6.081 HRW-10 | SISU-Power 66.253 ETA | differs |
| Displacement declared | 8.13 L | 6.60 L | +23% 8100 T |
| Maximum torque declared | 568 lb·ft · 770 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | — | Electrohydraulically operated wet VALEO multi-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 31.1 gpm · 117.7 L/min | 29.1 gpm · 110.0 L/min | +7% 8100 T |
| Pressure declared | 3,379 psi · 233 bar | 3,336 psi · 230 bar | — |
| Rear PTO speeds declared | 1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 24,471 lb · 11,100 kg | 13,889 lb · 6,300 kg | +76% 8100 T |
| Wheelbase declared | 89.0 in · 2,260 mm | 120.1 in · 3,050 mm | +35% MF 6495 A |
| Length declared | 216.0 in · 5,487 mm | 196.4 in · 4,989 mm | +10% 8100 T |
| Width declared | 102.0–109.3 in · 2,591–2,775 mm | 81.5–100.4 in · 2,071–2,550 mm | differs |
| Height, over the cab declared | 123.4 in · 3,135 mm | 121.9 in · 3,095 mm | — |
| Ground clearance declared | 14.2 in · 360 mm | 17.7 in · 450 mm | +25% MF 6495 A |
| Fuel tank declared | 519.9 qt · 492.0 L | 412.1 qt · 390.0 L | +26% 8100 T |
John Deere 8100 T sources
Source
- Source: Traktorenlexikon, “John Deere 8100T”
- Source: OECD test report 1780, 1998
Massey Ferguson MF 6495 A sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 6495”
- Source: Traktorenlexikon, “Massey Ferguson MF 7485”