- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1969–1971
- 9,591 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
International Harvester Farmall 826 specs: hp, weight, years
INTERNATIONAL HARVESTER C-301 six-cylinder. The manufacturer claimed 90.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
90.8 hp
67.7 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Farmall Farmall 826”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 9,859 lb
- Top speed
- 18.6 mph
International Harvester Farmall 826 specs: key facts
The International Harvester Farmall 826 was built from 1969 to 1971.
The International Harvester Farmall 826 has a claimed engine power (gross or net not stated) of 67.7 kW (90.8 hp); it has no measured PTO figure.
The International Harvester Farmall 826 is two-wheel drive (2WD).
The International Harvester Farmall 826 has a INTERNATIONAL HARVESTER C-301 engine, a 6-cylinder unit.Source 2
The International Harvester Farmall 826 weighs 4,472 kg (9,859 lb) unladen.
The International Harvester Farmall 826 has a rear PTO running at 540 rpm / 1000 rpm.
Source · Traktorenlexikon, “Farmall Farmall 826”
How does the Farmall 826 compare with its class?
- Limitation:
Eight forward gears is low for its class — 47% below the median of 15 across the 380 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 391 comparable records. How we work this out
How much horsepower does a Farmall 826 have?
The only figure for the Farmall 826 is 90.8 hp (67.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Farmall Farmall 826”
What engine is in a Farmall 826?
A Farmall 826 has an INTERNATIONAL HARVESTER C-301, a 6-cylinder engine.
| Make & model | INTERNATIONAL HARVESTER C-301Source 2 |
|---|---|
| Cylinders | 6, liquid-cooledSource 2 |
| Max torque | 251 lb·ft · 340 N·m @ 1,600 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Farmall Farmall 826”
How much will a Farmall 826 lift?
Hydraulic and PTO specifications for the Farmall 826 are below.
| Rear PTO | 540 rpm / 1000 rpm |
|---|
Source · Traktorenlexikon, “Farmall Farmall 826”
What transmission does a Farmall 826 have?
Transmission specifications for the Farmall 826 are below.
| Clutch | Pedal-operated dry single-plate clutch |
|---|---|
| Steering | Hydraulic steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Farmall Farmall 826”
How much does a Farmall 826 weigh?
A Farmall 826 weighs 9,859 lb (4,472 kg) unladen.
| Unladen weight | 9,859 lb · 4,472 kg |
|---|---|
| Wheelbase | 101.2 in · 2,570 mm |
| Length | 164.0 in · 4,166 mm |
| Width | 110.0 in · 2,794 mm |
| Height | 84.0 in · 2,134 mm |
| Ground clearance | 24.0 in · 610 mm |
| Front track | 8.0–16.0 in · 203–406 mm |
| Rear track | 60.0–94.0 in · 1,524–2,388 mm |
| Turning radius, braked | 9.8 ft · 2.97 m |
Source · Traktorenlexikon, “Farmall Farmall 826”
What oil does a Farmall 826 take, and how much?
A Farmall 826 engine takes 9.0 qt (8.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 9.0 qt · 8.5 LSource: Traktorenlexikon, “Farmall Farmall 826” · single source, not independently verified |
| Transmission | 68.1 qt · 64.4 LSource: Traktorenlexikon, “Farmall Farmall 826” · single source, not independently verified |
| Hydraulic | 67.9 qt · 64.3 LSource: Traktorenlexikon, “Farmall Farmall 826” · single source, not independently verified |
| Cooling system | 21.0 qt · 19.9 LSource: Traktorenlexikon, “Farmall Farmall 826” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a Farmall 826?
Within 10% of its 90.8 hp of claimed engine power, the same type, and first built within 15 years of it.
- Ford 7600 (A)90.8 hp engine, claimed · 1975–1981Side by side with the Farmall 826 →
- Ford 7700 (A)90.8 hp engine, claimed · 1976–1981Side by side with the Farmall 826 →
- Lamborghini R-904 (DT)90.8 hp engine, claimed · 1976–1982Side by side with the Farmall 826 →
- Renault 92190.8 hp engine, claimed · 1977–1980Side by side with the Farmall 826 →
- Renault 921-490.8 hp engine, claimed · 1977–1980Side by side with the Farmall 826 →
- Fiat 940 (DT)90.8 hp engine, claimed · 1978–1979Side by side with the Farmall 826 →
Common questions about the International Harvester Farmall 826
Is a Farmall 826 two-wheel drive or four-wheel drive?
The International Harvester Farmall 826 is two-wheel drive (2WD).
What PTO does a Farmall 826 have?
A Farmall 826 has a 540 rpm / 1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “IHC 806”; and Traktorenlexikon, “Farmall Farmall 826”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Farmall Farmall 826 — CC BY-SA 4.0, WIKIBOOKS-TL-118753 · revision 1054993. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: IHC 806 — CC BY-SA 4.0, WIKIBOOKS-TL-118729 · revision 1032560. Wikibooks contributors (Traktorenlexikon). Original document