9 material differences · fewer than 12
Tractor oneInternational Harvester Farmall 8261969–1971No measured PTO figureTractor twoLamborghini R-904 (DT)1976–1982No measured PTO figure
Which should you choose?
Read our verdict on the Farmall 826 and the R-904 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | Farmall 826 | R-904 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 90.8 hp | 90.8 hp | — |
| Engine declared | INTERNATIONAL HARVESTER C-301 | LAMBORGHINI FL-1154/2 | differs |
| Displacement declared | — | 4.99 L | — |
| Maximum torque declared | 251 lb·ft · 340 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% Farmall 826 |
| Clutch declared | Pedal-operated dry single-plate clutch | Dry LuK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 6.4 gpm · 24.2 L/min | — |
| Pressure declared | — | 2,418 psi · 167 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,859 lb · 4,472 kg | 6,636 lb · 3,010 kg | +49% Farmall 826 |
| Wheelbase declared | 101.2 in · 2,570 mm | — | — |
| Length declared | 164.0 in · 4,166 mm | 139.0 in · 3,530 mm | +18% Farmall 826 |
| Width declared | 110.0 in · 2,794 mm | 70.1–97.6 in · 1,780–2,480 mm | differs |
| Ground clearance declared | 24.0 in · 610 mm | 18.1 in · 460 mm | +33% Farmall 826 |
| Turning radius, braked declared | 9.8 ft · 2.97 m | — | — |
| Fuel tank declared | 147.9 qt · 140.0 L | 63.4 qt · 60.0 L | +133% Farmall 826 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester Farmall 826 sources
- Source: Traktorenlexikon, “Farmall Farmall 826”
- Source: Traktorenlexikon, “IHC 806”
Lamborghini R-904 (DT) sources
- Source: Traktorenlexikon, “Lamborghini R 904 DT”