10 material differences · fewer than 12
Tractor oneFord 7600 (A)1975–1981No measured PTO figureTractor twoInternational Harvester Farmall 8261969–1971No measured PTO figure
Which should you choose?
Read our verdict on the 7600 (A) and the Farmall 826 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 7600 (A) | Farmall 826 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 90.8 hp | 90.8 hp | — |
| Engine declared | Ford 256 DF | INTERNATIONAL HARVESTER C-301 | differs |
| Maximum torque declared | — | 251 lb·ft · 340 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal operated dry Borg & Beck single disc clutch | Pedal-operated dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.6 gpm · 36.4 L/min | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,109 lb · 2,771 kg | 9,859 lb · 4,472 kg | +61% Farmall 826 |
| Wheelbase declared | 87.5 in · 2,223 mm | 101.2 in · 2,570 mm | +16% Farmall 826 |
| Length declared | 145.2 in · 3,689 mm | 164.0 in · 4,166 mm | +13% Farmall 826 |
| Width declared | 80.7–101.7 in · 2,051–2,584 mm | 110.0 in · 2,794 mm | differs |
| Ground clearance declared | 15.7 in · 400 mm | 24.0 in · 610 mm | +53% Farmall 826 |
| Turning radius, braked declared | 10.6 ft · 3.23 m | 9.8 ft · 2.97 m | +9% 7600 (A) |
| Fuel tank declared | 79.8 qt · 75.5 L | 147.9 qt · 140.0 L | +85% Farmall 826 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 7600 (A) sources
- Source: Traktorenlexikon, “Ford 7600”
- Source: Traktorenlexikon, “Ford 6600”
International Harvester Farmall 826 sources
- Source: Traktorenlexikon, “Farmall Farmall 826”
- Source: Traktorenlexikon, “IHC 806”