- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1968–1973
- 5,800 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
International Harvester Farmall 544 Full specifications
INTERNATIONAL HARVESTER C-200 four-cylinder. The manufacturer claimed 51.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
51.2 hp
38.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Farmall Farmall 544”, claimed
- Weight
- 6,098 lb
- Hyd. flow
- 12.0 gpm
- Top speed
- 18.6 mph
International Harvester Farmall 544 specs: key facts
The International Harvester Farmall 544 was built from 1968 to 1973.
The International Harvester Farmall 544 has a claimed engine power (gross or net not stated) of 38.2 kW (51.2 hp); it has no measured PTO figure.
The International Harvester Farmall 544 is two-wheel drive (2WD).
The International Harvester Farmall 544 has a INTERNATIONAL HARVESTER C-200 engine, a 4-cylinder unit.Source 2
The International Harvester Farmall 544 weighs 2,766 kg (6,098 lb) unladen.
The International Harvester Farmall 544 has a dependent rear PTO running at 540/1000 rpm.
The hydraulic pump of the International Harvester Farmall 544 delivers 45.4 L/min (12.0 gpm).
Source · Traktorenlexikon, “Farmall Farmall 544”
How much horsepower does a Farmall 544 have?
The only figure for the Farmall 544 is 51.2 hp (38.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Farmall Farmall 544”
What engine is in a Farmall 544?
A Farmall 544 has an INTERNATIONAL HARVESTER C-200, a 4-cylinder engine.
| Make & model | INTERNATIONAL HARVESTER C-200Source 2 |
|---|---|
| Cylinders | 4, liquid-cooledSource 2 |
| Max torque | 171 lb·ft · 232 N·m @ 1,600 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Farmall Farmall 544”
How much will a Farmall 544 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the Farmall 544 are below.
| Pump flow | 12.0 gpm · 45.4 L/min |
|---|---|
| Rear PTO | Dependent, transmission-driven, 540/1000 rpm @ 1,988 engine rpm |
| PTO shaft | 1 3/8"- 6 splines or 1 3/4"-20teilig |
Source · Traktorenlexikon, “Farmall Farmall 544”
What transmission does a Farmall 544 have?
Transmission specifications for the Farmall 544 are below.
| Clutch | Pedal-operated dry single-plate clutch |
|---|---|
| Steering | Hydraulic steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Farmall Farmall 544”
How much does a Farmall 544 weigh?
A Farmall 544 weighs 6,098 lb (2,766 kg) unladen.
| Unladen weight | 6,098 lb · 2,766 kg |
|---|---|
| Wheelbase | 90.5 in · 2,299 mm |
| Length | 138.0 in · 3,505 mm |
| Width | 71.0 in · 1,803 mm |
| Height | 62.0 in · 1,575 mm |
| Ground clearance | 13.0 in · 330 mm |
| Front track | 8.0–16.0 in · 203–406 mm |
| Rear track | 54.0–96.0 in · 1,372–2,438 mm |
| Turning radius, braked | 8.7 ft · 2.64 m |
Source · Traktorenlexikon, “Farmall Farmall 544”
Which tractors compare with a Farmall 544?
Within 10% of its 51.2 hp of claimed engine power, the same type, and first built within 15 years of it.
- Fiat 550 (DT)51.2 hp engine, claimed · 1968–1978Side by side with the Farmall 544 →
- SOMECA 550 (DT)51.2 hp engine, claimed · 1968–1971Side by side with the Farmall 544 →
- SOMECA 615 (DT)51.2 hp engine, claimed · 1965–1968Side by side with the Farmall 544 →
- Ford 4000 (A) 6X/6Y51.2 hp engine, claimed · 1964–1975Side by side with the Farmall 544 →
- Fordson County Super IV51.2 hp engine, claimed · 1960–1964Side by side with the Farmall 544 →
- Hürlimann T-5100 (A)51.2 hp engine, claimed · 1977–1978Side by side with the Farmall 544 →
Everything else people ask
Is a Farmall 544 two-wheel drive or four-wheel drive?
The International Harvester Farmall 544 is two-wheel drive (2WD).
What PTO does a Farmall 544 have?
A Farmall 544 has a dependent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines or 1 3/4"-20teilig shaft.
Where this page comes from
Compiled from Traktorenlexikon, “IHC 544”; and Traktorenlexikon, “Farmall Farmall 544”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Farmall Farmall 544 — CC BY-SA 4.0, WIKIBOOKS-TL-118746 · revision 1054987. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: IHC 544 — CC BY-SA 4.0, WIKIBOOKS-TL-118745 · revision 1055425. Wikibooks contributors (Traktorenlexikon). Original document