• Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 1978–1979

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Fiat 940 (DT) specs: hp, weight, years

O.M.-FIAT CO 3/80 four-cylinder diesel. The manufacturer claimed 90.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

90.8 hp

67.7 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fiat 940/940 DT”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
8,708 lb
3-point lift
8,378 lb
Hyd. flow
10.0 gpm
Top speed
15.5 mph

Fiat 940 (DT) specs: key facts

  • The Fiat 940 (DT) was built from 1978 to 1979.

  • The Fiat 940 (DT) has a claimed engine power (gross or net not stated) of 67.7 kW (90.8 hp); it has no measured PTO figure.

  • The Fiat 940 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

  • The Fiat 940 (DT) has a O.M.-FIAT CO 3/80 engine, a 4-cylinder 4.94 L diesel unit.Source 2

  • The Fiat 940 (DT) weighs 3,950 kg (8,708 lb) unladen.

  • The three-point hitch of the Fiat 940 (DT) lifts 3,800 kg (8,378 lb) at the lower-link ends.

  • The hydraulic pump of the Fiat 940 (DT) delivers 38.0 L/min (10.0 gpm).

Source · Traktorenlexikon, “Fiat 940/940 DT”

Illustration of the 1978–1979 Fiat 940 (DT), a 91 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 940 (DT) have?

The only figure for the 940 (DT) is 90.8 hp (67.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
90.8 hp

Source · Traktorenlexikon, “Fiat 940/940 DT”

What engine is in a 940 (DT)?

A 940 (DT) has an O.M.-FIAT CO 3/80, a 4-cylinder 4.94 L diesel engine.

Engine — 940 (DT) engine specifications
Make & modelO.M.-FIAT CO 3/80
Cylinders4, liquid-cooledSource 1
Displacement301.4 ci · 4.94 L
Electrical system12 VSource 1

Source · Traktorenlexikon, “Someca 940”

How much will a 940 (DT) lift, and what is its hydraulic flow?

A 940 (DT) lifts 8,378 lb (3,800 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 940 (DT) hydraulics and PTO specifications
Pump flow10.0 gpm · 38.0 L/min
Pressure2,901 psi · 200 bar
Hitch categoryCategory 2
Lift at ends8,378 lb · 3,800 kg

Source · Traktorenlexikon, “Fiat 940/940 DT”

What transmission does a 940 (DT) have?

Transmission specifications for the 940 (DT) are below.

Transmission — 940 (DT) transmission specifications
ClutchDry FEREDO double clutch
BrakesPedal-operated wet FEREDO disc brake acting on the differential shafts
SteeringMechanically operated GEMMER steering
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Fiat 940/940 DT”

How much does a 940 (DT) weigh?

A 940 (DT) weighs 8,708 lb (3,950 kg) unladen.

Weights & dimensions — 940 (DT) weights and dimensions
Unladen weight8,708 lb · 3,950 kgDT: 4,300
Wheelbase93.3 in · 2,370 mmDT: 2,390
Length159.4 in · 4,050 mm
Width76.2–99.7 in · 1,935–2,532 mm
Height105.1 in · 2,670 mm
Ground clearance22.4 in · 570 mmDT: 420
Front track55.1–78.7 in · 1,400–2,000 mmDT: 1,700
Rear track59.1–82.7 in · 1,500–2,100 mm
Turning radius, braked12.6 ft · 3.84 mDT: 4,300

Source · Traktorenlexikon, “Fiat 940/940 DT”

What oil does a 940 (DT) take, and how much?

A 940 (DT) engine takes 9.8 qt (9.3 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

940 (DT) fluid capacities, grades and service intervals
SystemCapacity
Engine oil9.8 qt · 9.3 LSource: Traktorenlexikon, “Fiat 940/940 DT” · single source, not independently verified
Transmission & hydraulic46.5 qt · 44.0 LSource: Traktorenlexikon, “Fiat 940/940 DT” · single source, not independently verified
Cooling system21.1 qt · 20.0 LSource: Traktorenlexikon, “Fiat 940/940 DT” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 940 (DT)?

Within 10% of its 90.8 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Fiat 940 (DT)

Is a 940 (DT) two-wheel drive or four-wheel drive?

The Fiat 940 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

Sources and how this page was built

Compiled from Traktorenlexikon, “Someca 940”; and Traktorenlexikon, “Fiat 940/940 DT”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fiat 940/940 DT — CC BY-SA 4.0, WIKIBOOKS-TL-121866 · revision 1075191. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Someca 940 — CC BY-SA 4.0, WIKIBOOKS-TL-121342 · revision 1067786. Wikibooks contributors (Traktorenlexikon). Original document