• Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1956–1962
  • 13,298 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

International Harvester D-320 Farmall Full specifications

INTERNATIONAL-HARVESTER DD-99 three-cylinder diesel. The manufacturer claimed 19.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

19.7 hp

14.7 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “McCormick D-320 Farmall”, claimed

Weight
2,884 lb
3-point lift
1,323 lb
Top speed
12.4 mph

International Harvester D-320 Farmall specs: key facts

  • The International Harvester D-320 Farmall was built from 1956 to 1962.

  • The International Harvester D-320 Farmall has a claimed engine power (gross or net not stated) of 14.7 kW (19.7 hp); it has no measured PTO figure.

  • The International Harvester D-320 Farmall is two-wheel drive (2WD).

  • The International Harvester D-320 Farmall has a INTERNATIONAL-HARVESTER DD-99 engine, a 3-cylinder 1.63 L diesel unit.Source 2

  • The International Harvester D-320 Farmall weighs 1,308 kg (2,884 lb) unladen.

  • The International Harvester D-320 Farmall has a dependent rear PTO running at 540 rpm.

  • The three-point hitch of the International Harvester D-320 Farmall lifts 600 kg (1,323 lb) at the lower-link ends.

Source · Traktorenlexikon, “McCormick D-320 Farmall”

How much horsepower does a D-320 Farmall have?

The only figure for the D-320 Farmall is 19.7 hp (14.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
19.7 hp

Source · Traktorenlexikon, “McCormick D-320 Farmall”

What engine is in a D-320 Farmall?

A D-320 Farmall has an INTERNATIONAL-HARVESTER DD-99, a 3-cylinder 1.63 L diesel engine.

Engine — D-320 Farmall engine specifications
Make & modelINTERNATIONAL-HARVESTER DD-99Source 2
Cylinders3, liquid-cooledSource 2
Displacement99.5 ci · 1.63 LSource 2
Max torque63 lb·ft · 86 N·m @ 1,200 rpm
Electrical system12 V

Source · Traktorenlexikon, “McCormick D-320 Farmall”

How much will a D-320 Farmall lift?

A D-320 Farmall lifts 1,323 lb (600 kg) at the lower-link ends of its Category 1 three-point hitch.

Hydraulics & PTO — D-320 Farmall hydraulics and PTO specifications
Hitch categoryCategory 1
Lift at ends1,323 lb · 600 kg
Rear PTODependent, transmission-driven, 540 rpm @ 1,750 engine rpmGround-speed PTO available

Source · Traktorenlexikon, “McCormick D-320 Farmall”

What transmission does a D-320 Farmall have?

Transmission specifications for the D-320 Farmall are below.

Transmission — D-320 Farmall transmission specifications
Brakespedal-operated disc brake, positioned on differential half-shafts, usable as single-wheel brake
Steeringmechanically operated ZF-GEMMER steering, type GD-28
Top speed12.4 mph · 20 km/h

Source · Traktorenlexikon, “McCormick D-320 Farmall”

How much does a D-320 Farmall weigh?

A D-320 Farmall weighs 2,884 lb (1,308 kg) unladen.

Weights & dimensions — D-320 Farmall weights and dimensions
Unladen weight2,884 lb · 1,308 kg
Wheelbase70.1 in · 1,780 mm
Length108.3 in · 2,750 mm
Width64.6 in · 1,640 mm
Height61.0 in · 1,550 mm
Ground clearance15.1 in · 383 mm
Front track49.2–59.1 in · 1,250–1,500 mmthe article lists alternatives
Rear track49.2–74.8 in · 1,250–1,900 mm
Turning radius, braked8.4 ft · 2.55 m

Source · Traktorenlexikon, “McCormick D-320 Farmall”

Which tractors compare with a D-320 Farmall?

Within 10% of its 19.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a D-320 Farmall two-wheel drive or four-wheel drive?

The International Harvester D-320 Farmall is two-wheel drive (2WD).

What PTO does a D-320 Farmall have?

A D-320 Farmall has a dependent 540 rpm rear PTO.

What serial numbers does a D-320 Farmall carry?

The source prints serial numbers NT 200.001 to NT 213.300. It also records 6 changes by serial number. It does not say whether that is the tractor’s or the engine’s number, and we never work out a year from a serial number.

Every serial number on record for the D-320 Farmall → →

Where this page comes from

Compiled from Traktorenlexikon, “McCormick DED 3”; and Traktorenlexikon, “McCormick D-320 Farmall”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: McCormick D-320 FarmallCC BY-SA 4.0, WIKIBOOKS-TL-57222 · revision 1056052. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: McCormick DED 3CC BY-SA 4.0, WIKIBOOKS-TL-41176 · revision 1022332. Wikibooks contributors (Traktorenlexikon). Original document