0 material differences · fewer than 12
Tractor oneInternational Harvester D-320 Farmall1956–1962No measured PTO figureTractor twoInternational Harvester D-320 Standard1958–1962No measured PTO figure
Which should you choose?
Read our verdict on the D-320 Farmall and the D-320 Standard → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
0 material differences · 14 fields identical or within 5%, which is not counted as material
| Field | D-320 Farmall | D-320 Standard | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 19.7 hp | 19.7 hp | — |
| Engine declared | INTERNATIONAL-HARVESTER DD-99 | INTERNATIONAL-HARVESTER DD-99 | — |
| Displacement declared | 1.63 L | 1.63 L | — |
| Maximum torque declared | 63 lb·ft · 86 N·m | 63 lb·ft · 86 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 12.4 mph · 20 km/h | — |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 2,884 lb · 1,308 kg | 2,884 lb · 1,308 kg | — |
| Maximum permissible mass declared | — | 4,409 lb · 2,000 kg | — |
| Wheelbase declared | 70.1 in · 1,780 mm | 70.0 in · 1,779 mm | — |
| Length declared | 108.3 in · 2,750 mm | 108.3 in · 2,750 mm | — |
| Width declared | 64.6 in · 1,640 mm | 64.6 in · 1,640 mm | — |
| Height, over the steering wheel declared | 61.0 in · 1,550 mm | 61.0 in · 1,550 mm | — |
| Ground clearance declared | 15.1 in · 383 mm | 15.1 in · 383 mm | — |
| Turning radius, braked declared | 8.4 ft · 2.55 m | 8.4 ft · 2.55 m | — |
| Fuel tank declared | 28.5 qt · 27.0 L | 28.5 qt · 27.0 L | — |
International Harvester D-320 Farmall sources
Source
- Source: Traktorenlexikon, “McCormick D-320 Farmall”
- Source: Traktorenlexikon, “McCormick DED 3”
International Harvester D-320 Standard sources
Source
- Source: Traktorenlexikon, “McCormick D-320 Standard”
- Source: Traktorenlexikon, “McCormick DED 3”