- Rigid chassis
- WhichTractor size: Compact
- No lab test on file
- 1960–1964
- 2,000 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Deutz D 25.2 specs: hp, weight, years
KHD F2L 712 two-cylinder diesel. The manufacturer claimed 19.6 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
19.6 hp
14.6 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz D 25.2”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 2,844 lb
- Hyd. flow
- 4.2 gpm
- Top speed
- 12.4–16.4 mph
Deutz D 25.2 specs: key facts
The Deutz D 25.2 was built from 1960 to 1964.
The Deutz D 25.2 has a claimed engine power (gross or net not stated) of 14.6 kW (19.6 hp); it has no measured PTO figure.
The Deutz D 25.2 is two-wheel drive (2WD).
The Deutz D 25.2 has a KHD F2L 712 engine, a 2-cylinder 1.70 L diesel unit.Source 1
The Deutz D 25.2 weighs 1,290 kg (2,844 lb) unladen.
The Deutz D 25.2 has a dependent rear PTO running at 540 rpm.
The hydraulic pump of the Deutz D 25.2 delivers 16.0 L/min (4.2 gpm).
Source · Traktorenlexikon, “Deutz D 25.2”

How much horsepower does a Deutz D 25.2 have?
The only figure for the Deutz D 25.2 is 19.6 hp (14.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Deutz D 25.2”
What engine is in a Deutz D 25.2?
A Deutz D 25.2 has a KHD F2L 712, a 2-cylinder 1.70 L diesel engine.
| Make & model | KHD F2L 712 |
|---|---|
| Cylinders | 2, air-cooledSource 2 |
| Displacement | 103.7 ci · 1.70 L |
| Max torque | 63 lb·ft · 85 N·m @ 1,500 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Deutz D 25.1”
How much will a Deutz D 25.2 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the Deutz D 25.2 are below.
| Pump flow | 4.2 gpm · 16.0 L/min |
|---|---|
| Pressure | 2,134 psi · 147 bar |
| Hitch category | Category 1 |
| Rear PTO | Dependent, transmission-driven, 540 rpm @ 1,850 engine rpm |
| PTO shaft | 1 3/8 Zoll x 75 mm |
Source · Traktorenlexikon, “Deutz D 25.2”
What transmission does a Deutz D 25.2 have?
Transmission specifications for the Deutz D 25.2 are below.
| Clutch | Pedal operated single plate clutch in flywheel |
|---|---|
| Steering | Mechanical ZF finger steering |
| Top speed | 12.4–16.4 mph · 20.0–26.4 km/h |
Source · Traktorenlexikon, “Deutz D 25.2”
How much does a Deutz D 25.2 weigh?
A Deutz D 25.2 weighs 2,844 lb (1,290 kg) unladen.
| Unladen weight | 2,844 lb · 1,290 kg |
|---|---|
| Maximum permissible mass | 5,071 lb · 2,300 kg |
| Maximum front axle load | 1,543 lb · 700 kg |
| Maximum rear axle load | 3,527 lb · 1,600 kg |
| Wheelbase | 74.8 in · 1,900 mm |
| Length | 119.7 in · 3,040 mm |
| Width | 63.0 in · 1,600 mm |
| Height | 62.6 in · 1,590 mm |
| Ground clearance | 16.9 in · 430 mm |
| Front track | 50.8–66.5 in · 1,290–1,690 mm |
| Rear track | 49.2–59.1 in · 1,250–1,500 mm |
| Turning radius, braked | 8.7 ft · 2.65 m |
Source · Traktorenlexikon, “Deutz D 25.2”
What oil does a Deutz D 25.2 take, and how much?
A Deutz D 25.2 engine takes 6.3 qt (6 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 6.3 qt · 6 LSource: Traktorenlexikon, “Deutz D 25.2” · single source, not independently verified |
| Transmission | 0.8 qt · 0.8 LSource: Traktorenlexikon, “Deutz D 25.2” · single source, not independently verified |
| Hydraulic | 9.5 qt · 9 LSource: Traktorenlexikon, “Deutz D 25.2” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a Deutz D 25.2?
Within 10% of its 19.6 hp of claimed engine power, the same type, and first built within 15 years of it.
- Hanomag C 22019.6 hp engine, claimed · 1959–1960Side by side with the Deutz D 25.2 →
- International Harvester F-137D19.7 hp engine, claimed · 1960–1964Side by side with the Deutz D 25.2 →
- Fiat 211 R (A)19.7 hp engine, claimed · 1958–1964Side by side with the Deutz D 25.2 →
- International Harvester D-320 Standard19.7 hp engine, claimed · 1958–1962Side by side with the Deutz D 25.2 →
- International Harvester D-320 Farmall19.7 hp engine, claimed · 1956–1962Side by side with the Deutz D 25.2 →
- SOMECA SOM-27119.7 hp engine, claimed · 1964–1965Side by side with the Deutz D 25.2 →
Common questions about the Deutz D 25.2
Is a Deutz D 25.2 two-wheel drive or four-wheel drive?
The Deutz D 25.2 is two-wheel drive (2WD).
What PTO does a Deutz D 25.2 have?
A Deutz D 25.2 has a dependent 540 rpm rear PTO on a 1 3/8 Zoll x 75 mm shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “Deutz D 25.1”; and Traktorenlexikon, “Deutz D 25.2”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz D 25.1 — CC BY-SA 4.0, WIKIBOOKS-TL-49008 · revision 1018564. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Deutz D 25.2 — CC BY-SA 4.0, WIKIBOOKS-TL-49010 · revision 1053080. Wikibooks contributors (Traktorenlexikon). Original document