- Rigid chassis
- WhichTractor size: Compact
- No lab test on file
- 1995–1999
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Hürlimann Prince 435 DT specs: hp, weight, years
MITSUBISHI K4 F-D four-cylinder diesel. The manufacturer claimed 34.6 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
34.6 hp
25.8 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Hürlimann Prince 435”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 2,601 lb
- Hyd. flow
- 1.4 gpm
- Top speed
- 18.6 mph
Hürlimann Prince 435 DT specs: key facts
The Hürlimann Prince 435 DT was built from 1995 to 1999.
The Hürlimann Prince 435 DT has a claimed engine power (gross or net not stated) of 25.8 kW (34.6 hp); it has no measured PTO figure.
The Hürlimann Prince 435 DT is four-wheel drive (4WD).
The Hürlimann Prince 435 DT has a MITSUBISHI K4 F-D engine, a 4-cylinder 1.49 L diesel unit.
The Hürlimann Prince 435 DT weighs 1,180 kg (2,601 lb) unladen.
The Hürlimann Prince 435 DT has a rear PTO running at 540/1000 rpm.
The hydraulic pump of the Hürlimann Prince 435 DT delivers 5.3 L/min (1.4 gpm).
Source · Traktorenlexikon, “Hürlimann Prince 435”
How does the Prince 435 DT compare with its class?
- Limitation:
A hydraulic pump flow of 5.3 L/min is low for its class — 76% below the median of 21.8 L/min across the 110 machines within 10% of its power that hold this figure.
- Strength:
Twelve forward gears is high for its class — 100% above the median of 6 across the 165 machines within 10% of its power that hold this figure.
- Limitation:
A 29 L fuel tank is low for its class — 40% below the median of 48 L across the 150 machines within 10% of its power that hold this figure.
- Worth knowing:
An unladen mass of 1,180 kg is low for its class — 32% below the median of 1,723 kg across the 165 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 165 comparable records. How we work this out
How much horsepower does a Prince 435 DT have?
The only figure for the Prince 435 DT is 34.6 hp (25.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Hürlimann Prince 435”
What engine is in a Prince 435 DT?
A Prince 435 DT has an MITSUBISHI K4 F-D, a 4-cylinder 1.49 L diesel engine.
| Make & model | MITSUBISHI K4 F-D |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 90.9 ci · 1.49 L |
| Injection | direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Hürlimann Prince 435”
How much will a Prince 435 DT lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the Prince 435 DT are below.
| System | Load sensing |
|---|---|
| Pump flow | 1.4 gpm · 5.3 L/min |
| Pressure | 2,901 psi · 200 bar |
| Hitch category | Category 1 |
| Rear PTO | 540/1000 rpm @ 2,646 engine rpm |
| PTO shaft | 1 3/8"- 6 splines (Form-1) |
Source · Traktorenlexikon, “Hürlimann Prince 435”
What transmission does a Prince 435 DT have?
Transmission specifications for the Prince 435 DT are below.
| Clutch | Pedal-operated dry SDF single-disc clutch |
|---|---|
| Steering | Hydrostatic DANFOSS steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Hürlimann Prince 435”
How much does a Prince 435 DT weigh?
A Prince 435 DT weighs 2,601 lb (1,180 kg) unladen.
| Unladen weight | 2,601 lb · 1,180 kg |
|---|---|
| Wheelbase | 64.2 in · 1,630 mm |
| Length | 116.5 in · 2,960 mm |
| Width | 40.2–53.5 in · 1,020–1,360 mm |
| Height | 78.7 in · 2,000 mm |
| Ground clearance | 14.2 in · 360 mm |
| Front track | 38.2–42.9 in · 970–1,090 mm |
| Rear track | 32.3–40.6 in · 820–1,030 mm |
| Turning radius, braked | 9.0 ft · 2.73 m |
Source · Traktorenlexikon, “Hürlimann Prince 435”
What oil does a Prince 435 DT take, and how much?
A Prince 435 DT engine takes 5.9 qt (5.6 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 5.9 qt · 5.6 LSource: Traktorenlexikon, “Hürlimann Prince 435” · single source, not independently verified |
| Transmission & hydraulic | 22.2 qt · 21.0 LSource: Traktorenlexikon, “Hürlimann Prince 435” · single source, not independently verified |
| Front axle | 5.1 qt · 4.8 LSource: Traktorenlexikon, “Hürlimann Prince 435” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a Prince 435 DT?
Within 10% of its 34.6 hp of claimed engine power, the same type, and first built within 15 years of it.
- Hürlimann Prince 335 DT34.6 hp engine, claimed · 1995–1999Side by side with the Prince 435 DT →
- Deutz-Fahr Agrokid 35A34.6 hp engine, claimed · 1996–2004Side by side with the Prince 435 DT →
- Fiat 35-66 (DT)34.6 hp engine, claimed · 1990–1998Side by side with the Prince 435 DT →
- Lamborghini 350 DT34.5 hp engine, claimed · 1992–2003Side by side with the Prince 435 DT →
- SAME 35 DT34.5 hp engine, claimed · 1992–2003Side by side with the Prince 435 DT →
- Eicher 635K35 hp engine, claimed · 1986–1993Side by side with the Prince 435 DT →
Common questions about the Hürlimann Prince 435 DT
Is a Prince 435 DT two-wheel drive or four-wheel drive?
The Hürlimann Prince 435 DT is four-wheel drive (4WD).
What PTO does a Prince 435 DT have?
A Prince 435 DT has a 540/1000 rpm rear PTO on a 1 3/8"- 6 splines (Form-1) shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “Hürlimann Prince 435”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Hürlimann Prince 435 — CC BY-SA 4.0, WIKIBOOKS-TL-105416 · revision 865384. Wikibooks contributors (Traktorenlexikon). Original document