• Rigid chassis
  • WhichTractor size: Compact
  • Not independently tested
  • 1986–1993

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Eicher 635 K Full specifications

Eicher EDL 2 - 1 two-cylinder diesel. The manufacturer claimed 35 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

35 hp

26 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Eicher 635 K”, claimed

Weight
3,329 lb
Hyd. flow
11.6 gpm
Top speed
15.8 mph

Eicher 635 K specs: key facts

  • The Eicher 635 K was built from 1986 to 1993.

  • The Eicher 635 K has a claimed engine power (gross or net not stated) of 26 kW (35 hp); it has no measured PTO figure.

  • The Eicher 635 K is two-wheel drive (2WD).

  • The Eicher 635 K has a Eicher EDL 2 - 1 engine, a 2-cylinder 1.96 L diesel unit.Source 1

  • The Eicher 635 K weighs 1,510 kg (3,329 lb) unladen.

  • The Eicher 635 K has a rear PTO running at 540 rpm.

  • The hydraulic pump of the Eicher 635 K delivers 44.0 L/min (11.6 gpm).

Source · Traktorenlexikon, “Eicher 635 K”

How much horsepower does a 635 K have?

The only figure for the 635 K is 35 hp (26 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
35 hp

Source · Traktorenlexikon, “Eicher 635 K”

What engine is in a 635 K?

A 635 K has an Eicher EDL 2 - 1, a 2-cylinder 1.96 L diesel engine.

Engine — 635 K engine specifications
Make & modelEicher EDL 2 - 1
Cylinders2, air-cooledSource 2
Displacement119.8 ci · 1.96 L
Max torque97 lb·ft · 132 N·mSource 2

Source · Traktorenlexikon, “Eicher 535 ASK”

How much will a 635 K lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 635 K are below.

Hydraulics & PTO — 635 K hydraulics and PTO specifications
Pump flow11.6 gpm · 44.0 L/min
Rear PTO540 rpm
PTO shaft1 3/8"-6 splines

Source · Traktorenlexikon, “Eicher 635 K”

What transmission does a 635 K have?

Transmission specifications for the 635 K are below.

Transmission — 635 K transmission specifications
SteeringZF Servostat hydrostatic steering with Load Sensing
Top speed15.8 mph · 25.4 km/h

Source · Traktorenlexikon, “Eicher 635 K”

How much does a 635 K weigh?

A 635 K weighs 3,329 lb (1,510 kg) unladen.

Weights & dimensions — 635 K weights and dimensions
Unladen weight3,329 lb · 1,510 kg
Wheelbase65.6 in · 1,665 mm
Length98.2 in · 2,495 mm
Width35.6–45.3 in · 905–1,150 mm
Height75.6–78.7 in · 1,920–2,000 mmthe article lists alternatives
Ground clearance10.2 in · 260 mm
Front track28.7–44.5 in · 730–1,130 mm
Rear track28.5–45.3 in · 725–1,150 mm
Turning radius, braked8.2 ft · 2.50 m

Source · Traktorenlexikon, “Eicher 635 K”

Which tractors compare with a 635 K?

Within 10% of its 35 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 635 K two-wheel drive or four-wheel drive?

The Eicher 635 K is two-wheel drive (2WD).

What PTO does a 635 K have?

A 635 K has a 540 rpm rear PTO on a 1 3/8"-6 splines shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Eicher 535 ASK”; and Traktorenlexikon, “Eicher 635 K”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Eicher 535 ASKCC BY-SA 4.0, WIKIBOOKS-TL-82410 · revision 990448. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Eicher 635 KCC BY-SA 4.0, WIKIBOOKS-TL-82483 · revision 990456. Wikibooks contributors (Traktorenlexikon). Original document