• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1959–1962
  • 12,400 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

Hanomag R 324 S Full specifications

The manufacturer claimed 26.6 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

26.6 hp

19.8 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Hanomag R 324 S”, claimed

Weight
3,902 lb
Hyd. flow
4.2 gpm
Top speed
12.4 mph

Hanomag R 324 S specs: key facts

  • The Hanomag R 324 S was built from 1959 to 1962.

  • The Hanomag R 324 S has a claimed engine power (gross or net not stated) of 19.8 kW (26.6 hp); it has no measured PTO figure.

  • The Hanomag R 324 S is two-wheel drive (2WD).

  • The Hanomag R 324 S weighs 1,770 kg (3,902 lb) unladen.

  • The Hanomag R 324 S has a rear PTO running at 580 rpm.

  • The hydraulic pump of the Hanomag R 324 S delivers 16.0 L/min (4.2 gpm).

Source · Traktorenlexikon, “Hanomag R 324 S”

How much horsepower does an R 324 S have?

The only figure for the R 324 S is 26.6 hp (19.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
26.6 hp

Source · Traktorenlexikon, “Hanomag R 324 S”

How much will an R 324 S lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the R 324 S are below.

Hydraulics & PTO — R 324 S hydraulics and PTO specifications
Pump flow4.2 gpm · 16.0 L/min
Rear PTO580 rpm

Source · Traktorenlexikon, “Hanomag R 324 S”

What transmission does an R 324 S have?

Transmission specifications for the R 324 S are below.

Transmission — R 324 S transmission specifications
BrakesGerman servo brake
SteeringZF Ross steering
Top speed12.4 mph · 20 km/h

Source · Traktorenlexikon, “Hanomag R 324 S”

How much does an R 324 S weigh?

An R 324 S weighs 3,902 lb (1,770 kg) unladen.

Weights & dimensions — R 324 S weights and dimensions
Unladen weight3,902 lb · 1,770 kg
Maximum permissible mass5,181 lb · 2,350 kg
Wheelbase72.6 in · 1,845 mm
Length116.1 in · 2,950 mm
Width60.6 in · 1,540 mm
Height66.5 in · 1,690 mm
Ground clearance14.2 in · 360 mm
Front track49.2–61.0 in · 1,250–1,550 mmthe article lists alternatives
Rear track49.2–61.0 in · 1,250–1,550 mmthe article lists alternatives
Turning radius, braked10.7 ft · 3.25 m

Source · Traktorenlexikon, “Hanomag R 324 S”

Which tractors compare with an R 324 S?

Within 10% of its 26.6 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is an R 324 S two-wheel drive or four-wheel drive?

The Hanomag R 324 S is two-wheel drive (2WD).

What PTO does an R 324 S have?

An R 324 S has a 580 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Hanomag R 324 S”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Hanomag R 324 SCC BY-SA 4.0, WIKIBOOKS-TL-53212 · revision 1080617. Wikibooks contributors (Traktorenlexikon). Original document