8 material differences · fewer than 12
Tractor oneHanomag R 324 S1959–1962No measured PTO figureTractor twoVolvo T-15 Krabat1956–1962No measured PTO figure
Which should you choose?
Read our verdict on the R 324 S and the T-15 Krabat → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | R 324 S | T-15 Krabat | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 26.6 hp | 26.7 hp | — |
| Engine declared | — | AB-VOLVO B 14 C | — |
| Displacement declared | — | 1.41 L | — |
| Maximum torque declared | 82 lb·ft · 111 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 18.6 mph · 30 km/h | +50% T-15 Krabat |
| Hydraulics & hitch | |||
| Pump flow declared | 4.2 gpm · 16.0 L/min | 5.2 gpm · 19.5 L/min | +22% T-15 Krabat |
| Rear PTO speeds declared | 580 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,902 lb · 1,770 kg | 2,976 lb · 1,350 kg | +31% R 324 S |
| Maximum permissible mass declared | 5,181 lb · 2,350 kg | — | — |
| Wheelbase declared | 72.6 in · 1,845 mm | 75.4 in · 1,915 mm | — |
| Length declared | 116.1 in · 2,950 mm | 116.9 in · 2,970 mm | — |
| Width declared | 60.6 in · 1,540 mm | 66.9 in · 1,700 mm | +10% T-15 Krabat |
| Ground clearance declared | 14.2 in · 360 mm | 17.3 in · 440 mm | +22% T-15 Krabat |
| Turning radius, braked declared | 10.7 ft · 3.25 m | 9.8 ft · 3.00 m | +8% R 324 S |
| Fuel tank declared | 47.6 qt · 45 L | 42.3 qt · 40.0 L | +13% R 324 S |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hanomag R 324 S sources
- Source: Traktorenlexikon, “Hanomag R 324 S”
Volvo T-15 Krabat sources
- Source: Traktorenlexikon, “Volvo T 15”
- Source: Traktorenlexikon, “Bolinder-Munktell BM 15 Terrier”