• Vehicle type: unspecified
  • Standard layout
  • WhichTractor size: Standard-size
  • No lab test on file
  • from 2010

WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

Deutz-Fahr Agrotron M 420 specs: hp, weight, years

Weight
11,982 lb

Deutz-Fahr Agrotron M 420 specs: key facts

  • The Deutz-Fahr Agrotron M 420 was first built in 2010.

  • The Deutz-Fahr Agrotron M 420 is four-wheel drive (4WD).

  • The Deutz-Fahr Agrotron M 420 weighs 5,435 kg (11,982 lb) unladen.

  • The Deutz-Fahr Agrotron M 420 has a rear PTO running at 540/1000/540E/1000E rpm.

Source · Traktorenlexikon, “Deutz-Fahr Agrotron M 420”

Illustration of the 2010 Deutz-Fahr Agrotron M 420, a farm tractor, a drawing generated from its specification record
Illustration — not a photograph

How much horsepower does an Agrotron M 420 have?

No sourced power figure for the Agrotron M 420 is on record yet.

How much will an Agrotron M 420 lift?

Hydraulic and PTO specifications for the Agrotron M 420 are below.

Hydraulics & PTO — Agrotron M 420 hydraulics and PTO specifications
SystemOpen centre
Rear PTO540/1000/540E/1000E rpm

Source · Traktorenlexikon, “Deutz-Fahr Agrotron M 420”

What transmission does an Agrotron M 420 have?

Transmission specifications for the Agrotron M 420 are below.

Transmission — Agrotron M 420 transmission specifications
BrakesDisc brake system in oil bath

Source · Traktorenlexikon, “Deutz-Fahr Agrotron M 420”

How much does an Agrotron M 420 weigh?

An Agrotron M 420 weighs 11,982 lb (5,435 kg) unladen.

Weights & dimensions — Agrotron M 420 weights and dimensions
Unladen weight11,982 lb · 5,435 kg
Maximum permissible mass19,842 lb · 9,000 kg
Maximum front axle load10,362 lb · 4,700 kg
Maximum rear axle load15,873 lb · 7,200 kg
Wheelbase95.2 in · 2,419 mm
Length171.6 in · 4,359 mm
Width100.0 in · 2,540 mm
Height120.2 in · 3,054 mm
Ground clearance20.5 in · 520 mm
Front track74.8 in · 1,900 mm
Rear track72.8 in · 1,850 mm
Turning radius, braked15.3 ft · 4.65 m

Source · Traktorenlexikon, “Deutz-Fahr Agrotron M 420”

What oil does an Agrotron M 420 take, and how much?

An Agrotron M 420 engine takes 12.7 qt (12 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

Agrotron M 420 fluid capacities, grades and service intervals
SystemCapacity
Engine oil12.7 qt · 12 LSource: Traktorenlexikon, “Deutz-Fahr Agrotron M 420” · single source, not independently verified
Transmission & hydraulic84.5 qt · 80 LSource: Traktorenlexikon, “Deutz-Fahr Agrotron M 420” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with an Agrotron M 420?

Within 10% of its 128.6 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.

Common questions about the Deutz-Fahr Agrotron M 420

Is an Agrotron M 420 two-wheel drive or four-wheel drive?

The Deutz-Fahr Agrotron M 420 is four-wheel drive (4WD).

What PTO does an Agrotron M 420 have?

An Agrotron M 420 has a 540/1000/540E/1000E rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Deutz-Fahr Agrotron M 420”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Deutz-Fahr Agrotron M 420 — CC BY-SA 4.0, WIKIBOOKS-TL-75422 · revision 1023055. Wikibooks contributors (Traktorenlexikon). Original document