WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 2001–2003

It sits on the compact/utility boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Deutz-Fahr Agrotron 80 MK3 specs: hp, weight, years

Deutz BF 4 M 1012 E four-cylinder diesel. The manufacturer claimed 74.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

74.0 hp

55.2 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
8,752 lb
3-point lift
13,713 lb
Hyd. flow
21.9 gpm
Top speed
18.6–24.9 mph

Deutz-Fahr Agrotron 80 MK3 specs: key facts

  • The Deutz-Fahr Agrotron 80 MK3 was built from 2001 to 2003.

  • The Deutz-Fahr Agrotron 80 MK3 has a claimed engine power (gross or net not stated) of 55.2 kW (74.0 hp); it has no measured PTO figure.

  • The Deutz-Fahr Agrotron 80 MK3 is four-wheel drive (4WD).

  • The Deutz-Fahr Agrotron 80 MK3 has a Deutz BF 4 M 1012 E engine, a 4-cylinder 3.19 L diesel unit.Source 2

  • The Deutz-Fahr Agrotron 80 MK3 weighs 3,970 kg (8,752 lb) unladen.

  • The Deutz-Fahr Agrotron 80 MK3 has a rear PTO running at 540 rpm / 1000 rpm.

  • The three-point hitch of the Deutz-Fahr Agrotron 80 MK3 lifts 6,220 kg (13,713 lb) at the lower-link ends.

  • The hydraulic pump of the Deutz-Fahr Agrotron 80 MK3 delivers 83.0 L/min (21.9 gpm).

Source · Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3”

How does the Agrotron 80 MK3 compare with its class?

  • Strength:

    A three-point lift at the lower links of 6,220 kg is high for its class — 114% above the median of 2,900 kg across the 307 machines within 10% of its power that hold this figure.

  • Strength:

    A hydraulic pump flow of 83 L/min is high for its class — 102% above the median of 41 L/min across the 320 machines within 10% of its power that hold this figure.

  • Strength:

    21 forward gears is high for its class — 75% above the median of 12 across the 388 machines within 10% of its power that hold this figure.

  • Strength:

    A 180 L fuel tank is high for its class — 100% above the median of 90 L across the 366 machines within 10% of its power that hold this figure.

  • Worth knowing:

    An unladen mass of 3,970 kg is high for its class — 28% above the median of 3,100 kg across the 397 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 398 comparable records. How we work this out

Illustration of the 2001–2003 Deutz-Fahr Agrotron 80 MK3, a 74 hp farm tractor, a drawing generated from its specification record
Illustration — not a photograph

How much horsepower does an Agrotron 80 MK3 have?

The only figure for the Agrotron 80 MK3 is 74.0 hp (55.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
74.0 hp

Source · Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3”

What engine is in an Agrotron 80 MK3?

An Agrotron 80 MK3 has a Deutz BF 4 M 1012 E, a 4-cylinder 3.19 L diesel engine.

Engine — Agrotron 80 MK3 engine specifications
Make & modelDeutz BF 4 M 1012 ESource 2
Cylinders4, liquid-cooledSource 2
Displacement194.8 ci · 3.19 LSource 2
Max torque218 lb·ft · 296 N·m @ 1,500 rpm
Electrical system12 V

Source · Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3”

How much will an Agrotron 80 MK3 lift, and what is its hydraulic flow?

An Agrotron 80 MK3 lifts 13,713 lb (6,220 kg) at the lower-link ends.

Hydraulics & PTO — Agrotron 80 MK3 hydraulics and PTO specifications
Pump flow21.9 gpm · 83.0 L/min
Lift at ends13,713 lb · 6,220 kg
Rear PTO540 rpm / 1000 rpm @ 2,070 engine rpm

Source · Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3”

What transmission does an Agrotron 80 MK3 have?

Transmission specifications for the Agrotron 80 MK3 are below.

Transmission — Agrotron 80 MK3 transmission specifications
ClutchHydraulically operated wet ZF multi-plate clutch
BrakesHydraulically assisted, internal wet disc brake acting on the rear wheels
SteeringHydrostatic steering
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3”

How much does an Agrotron 80 MK3 weigh?

An Agrotron 80 MK3 weighs 8,752 lb (3,970 kg) unladen.

Weights & dimensions — Agrotron 80 MK3 weights and dimensions
Unladen weight8,752 lb · 3,970 kg
Maximum permissible mass14,330 lb · 6,500 kg
Wheelbase95.2 in · 2,419 mm
Length157.7 in · 4,005 mm
Width81.1 in · 2,060 mm
Height107.1 in · 2,720 mm
Ground clearance18.7 in · 475 mm
Front track63.0–66.9 in · 1,600–1,700 mmWikibooks gives one track for both axles; the article lists alternatives
Rear track63.0–66.9 in · 1,600–1,700 mmWikibooks gives one track for both axles; the article lists alternatives

Source · Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3”

What oil does an Agrotron 80 MK3 take, and how much?

An Agrotron 80 MK3 engine takes 10.6 qt (10 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

Agrotron 80 MK3 fluid capacities, grades and service intervals
SystemCapacity
Engine oil10.6 qt · 10 LSource: Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” · single source, not independently verified
Hydraulic40.2 qt · 38 LSource: Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” · single source, not independently verified
Front axle4.9 qt · 4.6 LSource: Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” · single source, not independently verified
Cooling system16.4 qt · 15.5 LSource: Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with an Agrotron 80 MK3?

Within 10% of its 74.0 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Deutz-Fahr Agrotron 80 MK3

Is an Agrotron 80 MK3 two-wheel drive or four-wheel drive?

The Deutz-Fahr Agrotron 80 MK3 is four-wheel drive (4WD).

What PTO does an Agrotron 80 MK3 have?

An Agrotron 80 MK3 has a 540 rpm / 1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Fendt Farmer 307 C”; and Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Deutz-Fahr Agrotron 80 MK3 — CC BY-SA 4.0, WIKIBOOKS-TL-88921 · revision 832450. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Fendt Farmer 307 C — CC BY-SA 4.0, WIKIBOOKS-TL-82822 · revision 942970. Wikibooks contributors (Traktorenlexikon). Original document