- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 2000–2003
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Deutz-Fahr Agrotron 106 MK3 specs: hp, weight, years
The manufacturer claimed 98.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
98.7 hp
73.6 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr Agrotron 106 MK3”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 11,045 lb
- 3-point lift
- 13,713 lb
- Hyd. flow
- 21.9 gpm
- Top speed
- 24.9–31.1 mph
Deutz-Fahr Agrotron 106 MK3 specs: key facts
The Deutz-Fahr Agrotron 106 MK3 was built from 2000 to 2003.
The Deutz-Fahr Agrotron 106 MK3 has a claimed engine power (gross or net not stated) of 73.6 kW (98.7 hp); it has no measured PTO figure.
The Deutz-Fahr Agrotron 106 MK3 is four-wheel drive (4WD).
The Deutz-Fahr Agrotron 106 MK3 weighs 5,010 kg (11,045 lb) unladen.
The Deutz-Fahr Agrotron 106 MK3 has an independent rear PTO running at 540 rpm / 1000 rpm.
The three-point hitch of the Deutz-Fahr Agrotron 106 MK3 lifts 6,220 kg (13,713 lb) at the lower-link ends.
The hydraulic pump of the Deutz-Fahr Agrotron 106 MK3 delivers 83.0 L/min (21.9 gpm).
Source · Traktorenlexikon, “Deutz-Fahr Agrotron 106 MK3”
How does the Agrotron 106 MK3 compare with its class?
- Strength:
A 270 L fuel tank is high for its class — 93% above the median of 140 L across the 291 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 309 comparable records. How we work this out
How much horsepower does an Agrotron 106 MK3 have?
The only figure for the Agrotron 106 MK3 is 98.7 hp (73.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Deutz-Fahr Agrotron 106 MK3”
How much will an Agrotron 106 MK3 lift, and what is its hydraulic flow?
An Agrotron 106 MK3 lifts 13,713 lb (6,220 kg) at the lower-link ends.
| System | Open centre, load sensing |
|---|---|
| Pump flow | 21.9 gpm · 83.0 L/min |
| Lift at ends | 13,713 lb · 6,220 kg |
| Rear PTO | Independent, 540 rpm / 1000 rpmEngages under load |
Source · Traktorenlexikon, “Deutz-Fahr Agrotron 106 MK3”
What transmission does an Agrotron 106 MK3 have?
Transmission specifications for the Agrotron 106 MK3 are below.
| Clutch | Hydraulically operated ZF multi-disc clutch running in an oil bath |
|---|---|
| Steering | Hydrostatic steering with synchronizing cylinder |
| Top speed | 24.9–31.1 mph · 40–50 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Deutz-Fahr Agrotron 106 MK3”
How much does an Agrotron 106 MK3 weigh?
An Agrotron 106 MK3 weighs 11,045 lb (5,010 kg) unladen.
| Unladen weight | 11,045 lb · 5,010 kg |
|---|---|
| Maximum permissible mass | 18,739 lb · 8,500 kg |
| Maximum front axle load | 9,259 lb · 4,200 kg |
| Maximum rear axle load | 14,330 lb · 6,500 kg |
| Wheelbase | 104.2 in · 2,647 mm |
| Length | 178.0 in · 4,520 mm |
| Width | 90.7 in · 2,304 mm |
| Height | 113.0 in · 2,870 mm |
| Ground clearance | 20.5 in · 520 mm |
| Front track | 70.9 in · 1,800 mmWikibooks gives one track for both axles |
| Rear track | 70.9 in · 1,800 mmWikibooks gives one track for both axles |
Source · Traktorenlexikon, “Deutz-Fahr Agrotron 106 MK3”
What oil does an Agrotron 106 MK3 take, and how much?
An Agrotron 106 MK3 engine takes 15.9 qt (15 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 15.9 qt · 15 LSource: Traktorenlexikon, “Deutz-Fahr Agrotron 106 MK3” · single source, not independently verified |
| Hydraulic | 76.1 qt · 72 LSource: Traktorenlexikon, “Deutz-Fahr Agrotron 106 MK3” · single source, not independently verified |
| Front axle | 5.3 qt · 5 LSource: Traktorenlexikon, “Deutz-Fahr Agrotron 106 MK3” · single source, not independently verified |
| Cooling system | 18.5 qt · 17.5 LSource: Traktorenlexikon, “Deutz-Fahr Agrotron 106 MK3” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with an Agrotron 106 MK3?
Within 10% of its 98.7 hp of claimed engine power, the same type, and first built within 15 years of it.
- Deutz-Fahr Agrotron 105 MK398.7 hp engine, claimed · 2001–2003Side by side with the Agrotron 106 MK3 →
- Deutz-Fahr Agrosun 10098.7 hp engine, claimed · 1998–2004Side by side with the Agrotron 106 MK3 →
- Deutz-Fahr Agrotron 10698.7 hp engine, claimed · 1997–2000Side by side with the Agrotron 106 MK3 →
- Fiat TS 110 (DT)98.7 hp engine, claimed · 1997–2003Side by side with the Agrotron 106 MK3 →
- Massey Ferguson 4260 (A)98.7 hp engine, claimed · 1997–2001Side by side with the Agrotron 106 MK3 →
- Massey Ferguson 5455 (A)98.7 hp engine, claimed · 2003–2013Side by side with the Agrotron 106 MK3 →
Common questions about the Deutz-Fahr Agrotron 106 MK3
Is an Agrotron 106 MK3 two-wheel drive or four-wheel drive?
The Deutz-Fahr Agrotron 106 MK3 is four-wheel drive (4WD).
What PTO does an Agrotron 106 MK3 have?
An Agrotron 106 MK3 has a independent 540 rpm / 1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Deutz-Fahr Agrotron 106 MK3”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr Agrotron 106 MK3 — CC BY-SA 4.0, WIKIBOOKS-TL-89022 · revision 990273. Wikibooks contributors (Traktorenlexikon). Original document