10 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrotron M 420from 2010No measured PTO figureTractor twoJohn Deere 76101997–2002126.9 hpMeasured at the PTO · OECD Test 1961
Which should you choose?
We will not advise between these two machines, because their power is not stated as the same quantity on both; the drive differs (4WD; Two-wheel or four-wheel drive); they were not built in overlapping years (2010–2010; 1997–2002). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
10 material differences · 0 fields identical or within 5%, which is not counted as material
| Field | Agrotron M 420 | 7610 | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | — | 126.9 hp | — |
| Drawbar power, measured measured | — | 114.0 hp | — |
| Engine | |||
| Engine declared | — | John Deere 6068TRW72 | — |
| Displacement declared | — | 6.79 L | — |
| Maximum torque declared | 486 lb·ft · 659 N·m | 420 lb·ft · 569.0 N·m | +16% Agrotron M 420 |
| Transmission | |||
| Top speed declared | — | 18.6–31.1 mph · 30–50 km/h | — |
| Clutch declared | — | Pedal-operated hydraulic wet John Deere multi-plate clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Closed centre | differs |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | — | 26.9 gpm · 102.0 L/min | — |
| Pressure declared | — | 2,538 psi · 175 bar | — |
| Rear PTO speeds declared | 540/1000/540E/1000E rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,982 lb · 5,435 kg | 13,653–14,480 lb · 6,193–6,568 kg | differs |
| Maximum permissible mass declared | 19,842 lb · 9,000 kg | 25,353 lb · 11,500 kg | +28% 7610 |
| Wheelbase declared | 95.2 in · 2,419 mm | 110.2–114.2 in · 2,800–2,900 mm | differs |
| Length declared | 171.6 in · 4,359 mm | 187.2 in · 4,755 mm | +9% 7610 |
| Width declared | 100.0 in · 2,540 mm | 118.7 in · 3,015 mm | +19% 7610 |
| Ground clearance declared | 20.5 in · 520 mm | 18.3 in · 465 mm | +12% Agrotron M 420 |
| Turning radius, braked declared | 15.3 ft · 4.65 m | — | — |
| Fuel tank declared | 190.2 qt · 180 L | 259.9 qt · 246 L | +37% 7610 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotron M 420 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron M 420”
John Deere 7610 sources
- Source: OECD test report 1961, 2001
- Source: Traktorenlexikon, “John Deere 7610”