6 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrotron M 420from 2010No measured PTO figureTractor twoDeutz-Fahr Agrotron TTV 6202007–2012No measured PTO figure
Which should you choose?
Read our verdict on the Agrotron M 420 and the Agrotron TTV 620 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Agrotron M 420 | Agrotron TTV 620 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | — | 166 hp | — |
| Maximum torque declared | 486 lb·ft · 659 N·m | 511 lb·ft · 693 N·m | — |
| Transmission | |||
| Top speed declared | — | 24.9–31.1 mph · 40–50 km/h | — |
| Clutch declared | — | Electro-hydraulic wet multi-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | — | 32.1 gpm · 121.5 L/min | — |
| Rear PTO speeds declared | 540/1000/540E/1000E rpm | 540/1000/540E/1000E rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,982 lb · 5,435 kg | 14,385 lb · 6,525 kg | +20% Agrotron TTV 620 |
| Maximum permissible mass declared | 19,842 lb · 9,000 kg | — | — |
| Wheelbase declared | 95.2 in · 2,419 mm | 108.9 in · 2,767 mm | +14% Agrotron TTV 620 |
| Length declared | 171.6 in · 4,359 mm | 187.3 in · 4,757 mm | +9% Agrotron TTV 620 |
| Width declared | 100.0 in · 2,540 mm | 98.4 in · 2,500 mm | — |
| Ground clearance declared | 20.5 in · 520 mm | 22.4 in · 570 mm | +10% Agrotron TTV 620 |
| Turning radius, braked declared | 15.3 ft · 4.65 m | 16.8 ft · 5.13 m | +10% Agrotron TTV 620 |
| Fuel tank declared | 190.2 qt · 180 L | 317.0 qt · 300 L | +67% Agrotron TTV 620 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotron M 420 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron M 420”
Deutz-Fahr Agrotron TTV 620 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron TTV 620”