- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1985–1988
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
DEUTZ-ALLIS 8030 Full specifications
ALLIS-CHALMERS 670 T six-cylinder diesel. The manufacturer claimed 132.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
132.1 hp
98.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Allis 8030”, claimed
- Weight
- 11,451 lb
- Hyd. flow
- 22.0 gpm
- Top speed
- 18.6 mph
DEUTZ-ALLIS 8030 specs: key facts
The DEUTZ-ALLIS 8030 was built from 1985 to 1988.
The DEUTZ-ALLIS 8030 has a claimed engine power (gross or net not stated) of 98.5 kW (132.1 hp); it has no measured PTO figure.
The DEUTZ-ALLIS 8030 was offered in two-wheel-drive and four-wheel-drive versions.
The DEUTZ-ALLIS 8030 has a ALLIS-CHALMERS 670 T engine, a 6-cylinder 6.98 L diesel unit.
The DEUTZ-ALLIS 8030 weighs 5,194 kg (11,451 lb) unladen.
The DEUTZ-ALLIS 8030 has an independent rear PTO running at 540/1000 rpm.
The hydraulic pump of the DEUTZ-ALLIS 8030 delivers 83.3 L/min (22.0 gpm).
Source · Traktorenlexikon, “Deutz-Allis 8030”
How much horsepower does an 8030 have?
The only figure for the 8030 is 132.1 hp (98.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Deutz-Allis 8030”
What engine is in an 8030?
An 8030 has an ALLIS-CHALMERS 670 T, a 6-cylinder 6.98 L diesel engine.
| Make & model | ALLIS-CHALMERS 670 T |
|---|---|
| Cylinders | 6, liquid-cooled |
| Displacement | 426.0 ci · 6.98 L |
| Injection | Direct injection method with hanging valves and multi-hole nozzle |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Deutz-Allis 8030”
How much will an 8030 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 8030 are below.
| System | Closed centre |
|---|---|
| Pump flow | 22.0 gpm · 83.3 L/min |
| Pressure | 3,771 psi · 260 bar |
| Hitch category | Category 2 |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 2,230 engine rpm |
| PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 parts |
Source · Traktorenlexikon, “Deutz-Allis 8030”
What transmission does an 8030 have?
Transmission specifications for the 8030 are below.
| Clutch | Electro-hydraulically operated wet multi-disc clutch |
|---|---|
| Steering | Hydrostatic steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Deutz-Allis 8030”
How much does an 8030 weigh?
An 8030 weighs 11,451 lb (5,194 kg) unladen.
| Unladen weight | 11,451 lb · 5,194 kg4 WD: 6,811 kg |
|---|---|
| Wheelbase | 106.0 in · 2,692 mm4 WD: 2,438 |
| Length | 187.0 in · 4,750 mm |
| Width | 93.4 in · 2,372 mm |
| Height | 115.0 in · 2,921 mm |
| Ground clearance | 21.0 in · 533 mm4 WD: 445 |
| Front track | 60.0–88.0 in · 1,524–2,235 mm1,575-1,778 |
| Rear track | 59.0–97.0 in · 1,499–2,464 mm |
| Turning radius, braked | 12.5 ft · 3.80 m4 WD: 4,064 |
Source · Traktorenlexikon, “Deutz-Allis 8030”
Which tractors compare with an 8030?
Within 10% of its 132.1 hp of claimed engine power, the same type, and first built within 15 years of it.
- Fendt Favorit 612 LS132.5 hp engine, claimed · 1983–1987Side by side with the 8030 →
- Schlüter Super 1300 LS132.5 hp engine, claimed · 1993Side by side with the 8030 →
- Fendt Favorit 614 SA132.6 hp engine, claimed · 1974–1976Side by side with the 8030 →
- Hürlimann D-550 Hydrostat133.0 hp engine, claimed · 1974Side by side with the 8030 →
- Bührer 6135133 hp engine, claimed · 1975–1978Side by side with the 8030 →
- Lamborghini R-1356 DT133.2 hp engine, claimed · 1980–1984Side by side with the 8030 →
Everything else people ask
Is an 8030 two-wheel drive or four-wheel drive?
The DEUTZ-ALLIS 8030 was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does an 8030 have?
An 8030 has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines and 1 3/8"- 21 parts shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Deutz-Allis 8030”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Allis 8030 — CC BY-SA 4.0, WIKIBOOKS-TL-122451 · revision 1083855. Wikibooks contributors (Traktorenlexikon). Original document