- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1985–1988
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
DEUTZ-ALLIS 8030 Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the 8030.
Engine power, claimed · gross or net not stated
132.1 hp
98.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Allis 8030”, claimed
What hydraulics does an 8030 have?
Hydraulic and hitch specifications for the 8030 are below.
| Hydraulic centre | Closed centre |
|---|---|
| Pump flow | 22.0 gpm · 83.3 L/min |
| Steering pump flow | 9.5 gpm · 36.0 L/min |
| Hydraulic pressure | 3,771 psi · 260 bar |
| Rear remote valves | 1 |
| Three-point hitch category | Category 2 |
| Lift capacity 610 mm behind ends, optional | 8,201 lb · 3,720 kg |
Source · Traktorenlexikon, “Deutz-Allis 8030”
What PTO does an 8030 have?
An 8030 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,230 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 parts |
Source · Traktorenlexikon, “Deutz-Allis 8030”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “Deutz-Allis 8030”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Allis 8030 — CC BY-SA 4.0, WIKIBOOKS-TL-122451 · revision 1083855. Wikibooks contributors (Traktorenlexikon). Original document