11 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 80301985–1988No measured PTO figureTractor twoFendt Favorit 614 SA1974–1976No measured PTO figure
Which should you choose?
Read our verdict on the 8030 and the Favorit 614 SA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 8030 | Favorit 614 SA | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 132.1 hp | 132.6 hp | — |
| Engine declared | ALLIS-CHALMERS 670 T | MWM TD 226-6 | differs |
| Displacement declared | 6.98 L | 6.24 L | +12% 8030 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Electro-hydraulically operated wet multi-disc clutch | Air-cooled single-disc dry clutch from Fichtel & Sachs, type G 350 K | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 22.0 gpm · 83.3 L/min | 10.1 gpm · 38.4 L/min | +117% 8030 |
| Pressure declared | 3,771 psi · 260 bar | 2,538 psi · 175 bar | +49% 8030 |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,451 lb · 5,194 kg | 10,902 lb · 4,945 kg | — |
| Maximum permissible mass declared | — | 16,535 lb · 7,500 kg | — |
| Wheelbase declared | 106.0 in · 2,692 mm | 106.3 in · 2,700 mm | — |
| Length declared | 187.0 in · 4,750 mm | 175.7 in · 4,464 mm | +6% 8030 |
| Width declared | 93.4 in · 2,372 mm | 84.8 in · 2,154 mm | +10% 8030 |
| Ground clearance declared | 21.0 in · 533 mm | 17.9 in · 455 mm | +17% 8030 |
| Turning radius, braked declared | 12.5 ft · 3.80 m | 17.7 ft · 5.40 m | +42% Favorit 614 SA |
| Fuel tank declared | 239.9 qt · 227.0 L | 190.2 qt · 180 L | +26% 8030 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
DEUTZ-ALLIS 8030 sources
- Source: Traktorenlexikon, “Deutz-Allis 8030”
Fendt Favorit 614 SA sources
- Source: Traktorenlexikon, “Fendt Favorit 614 SA”