DEUTZ-ALLIS 8030 vs Fendt Favorit 612 LS

9 material differences · fewer than 12

Tractor one

1985–1988

No measured PTO figure

Tractor two

1983–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 8030 and the Favorit 612 LS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 8030 and Fendt Favorit 612 LS, field by field
Field	8030	Favorit 612 LS	Gap
Engine
Engine power, claimed claimed	132.1 hp	132.5 hp	—
Engine declared	ALLIS-CHALMERS 670 T	MWM D 226.6 (ab Bj.'83: TD 226.6.2)	differs
Displacement declared	6.98 L	6.23 L	+12% 8030
Maximum torque declared	—	361 lb·ft · 490 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Electro-hydraulically operated wet multi-disc clutch	Fichtel & Sachs GMFZ 360	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	22.0 gpm · 83.3 L/min	—	—
Pressure declared	3,771 psi · 260 bar	—	—
Three-point lift at ends declared	—	14,478 lb · 6,567 kg	—
Rear PTO speeds declared	540/1000 rpm	750/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,451 lb · 5,194 kg	15,487 lb · 7,025 kg	+35% Favorit 612 LS
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	106.0 in · 2,692 mm	106.9 in · 2,715 mm	—
Length declared	187.0 in · 4,750 mm	189.0 in · 4,800 mm	—
Width declared	93.4 in · 2,372 mm	86.8 in · 2,204 mm	+8% 8030
Height declared	115.0 in · 2,921 mm	112.6 in · 2,860 mm	—
Ground clearance declared	21.0 in · 533 mm	19.7 in · 500 mm	+7% 8030
Turning radius, braked declared	12.5 ft · 3.80 m	18.7 ft · 5.70 m	+50% Favorit 612 LS
Fuel tank declared	239.9 qt · 227.0 L	234.6 qt · 222 L	—

Source

Source