• Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 2007–2011

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Case-IH Puma 140 specs: hp, weight, years

IVECO-NEF 667 TA six-cylinder diesel. The manufacturer claimed 140.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

140.0 hp

104.4 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case-IH Puma 140”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
13,889 lb
Hyd. flow
30.5 gpm
Top speed
24.9–31.1 mph

Case-IH Puma 140 specs: key facts

  • The Case-IH Puma 140 was built from 2007 to 2011.

  • The Case-IH Puma 140 has a claimed engine power (gross or net not stated) of 104.4 kW (140.0 hp); it has no measured PTO figure.

  • The Case-IH Puma 140 is four-wheel drive (4WD).

  • The Case-IH Puma 140 has a IVECO-NEF 667 TA engine, a 6-cylinder 6.73 L diesel unit.Source 2

  • The Case-IH Puma 140 weighs 6,300 kg (13,889 lb) unladen.

  • The Case-IH Puma 140 has an independent rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the Case-IH Puma 140 delivers 115.6 L/min (30.5 gpm).

Source · Traktorenlexikon, “Case-IH Puma 140”

Illustration of the 2007–2011 Case-IH Puma 140, a 140 hp farm tractor, a drawing generated from its specification record
Illustration — not a photograph

How much horsepower does a Puma 140 have?

The only figure for the Puma 140 is 140.0 hp (104.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
140.0 hp

Source · Traktorenlexikon, “Case-IH Puma 140”

What engine is in a Puma 140?

A Puma 140 has an IVECO-NEF 667 TA, a 6-cylinder 6.73 L diesel engine.

Engine — Puma 140 engine specifications
Make & modelIVECO-NEF 667 TASource 2
Cylinders6, liquid-cooledSource 2
Displacement410.6 ci · 6.73 LSource 2
Max torque441 lb·ft · 598 N·m @ 1,201 rpm
Electrical system12 V

Source · Traktorenlexikon, “Case-IH Puma 140”

How much will a Puma 140 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the Puma 140 are below.

Hydraulics & PTO — Puma 140 hydraulics and PTO specifications
SystemLoad sensing
Pump flow30.5 gpm · 115.6 L/min
Pressure2,466 psi · 170 bar
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 1,969 engine rpm
PTO shaft1 3/8"- 6 splines and 1 3/8"- 21 spline

Source · Traktorenlexikon, “Case-IH Puma 140”

What transmission does a Puma 140 have?

Transmission specifications for the Puma 140 are below.

Transmission — Puma 140 transmission specifications
Top speed24.9–31.1 mph · 40–50 km/hthe article lists alternatives

Source · Traktorenlexikon, “Case-IH Puma 140”

How much does a Puma 140 weigh?

A Puma 140 weighs 13,889 lb (6,300 kg) unladen.

Weights & dimensions — Puma 140 weights and dimensions
Unladen weight13,889 lb · 6,300 kg
Maximum permissible mass23,149 lb · 10,500 kg
Maximum front axle load10,803 lb · 4,900 kg
Maximum rear axle load17,196 lb · 7,800 kg
Wheelbase109.8 in · 2,789 mm
Length175.2 in · 4,449 mm
Width85.2–114.2 in · 2,165–2,900 mm
Height117.5 in · 2,985 mm
Ground clearance18.7 in · 475 mm
Front track61.4–88.8 in · 1,560–2,256 mm
Rear track57.9–90.3 in · 1,470–2,294 mm

Source · Traktorenlexikon, “Case-IH Puma 140”

What oil does a Puma 140 take, and how much?

A Puma 140 engine takes 15.9 qt (15.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

Puma 140 fluid capacities, grades and service intervals
SystemCapacity
Engine oil15.9 qt · 15.0 LSource: Traktorenlexikon, “Case-IH Puma 140” · single source, not independently verified
Hydraulic82.4 qt · 78.0 LSource: Traktorenlexikon, “Case-IH Puma 140” · single source, not independently verified
Front axle9.5 qt · 9.0 LSource: Traktorenlexikon, “Case-IH Puma 140” · single source, not independently verified
Cooling system26.4 qt · 25.0 LSource: Traktorenlexikon, “Case-IH Puma 140” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a Puma 140?

Within 10% of its 140.0 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Case-IH Puma 140

Is a Puma 140 two-wheel drive or four-wheel drive?

The Case-IH Puma 140 is four-wheel drive (4WD).

What PTO does a Puma 140 have?

A Puma 140 has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines and 1 3/8"- 21 spline shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “New Holland T 6050 Elite”; and Traktorenlexikon, “Case-IH Puma 140”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case-IH Puma 140 — CC BY-SA 4.0, WIKIBOOKS-TL-115825 · revision 984143. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: New Holland T 6050 Elite — CC BY-SA 4.0, WIKIBOOKS-TL-111273 · revision 993231. Wikibooks contributors (Traktorenlexikon). Original document