- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 2007–2011
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Case-IH Puma 140 Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the Puma 140.
Engine power, claimed · gross or net not stated
140.0 hp
104.4 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH Puma 140”, claimed
What hydraulics does a Puma 140 have?
Hydraulic and hitch specifications for the Puma 140 are below.
| Hydraulic control | Load sensing |
|---|---|
| Pump flow | 30.5 gpm · 115.6 L/min |
| Hydraulic pressure | 2,466 psi · 170 bar |
| Rear remote valves | 4 |
| Hitch control | Raising, lowering, lowering throttle and floating position |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Case-IH Puma 140”
What PTO does a Puma 140 have?
A Puma 140 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,969 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 spline |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Case-IH Puma 140”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “Case-IH Puma 140”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH Puma 140 — CC BY-SA 4.0, WIKIBOOKS-TL-115825 · revision 984143. Wikibooks contributors (Traktorenlexikon). Original document