WhichTractor
  • Rigid chassis
  • WhichTractor size: Compact
  • Not independently tested
  • 2004–2007

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Agco GT-45 Full specifications

SAME-DEUTZ-FAHR 1000.3 three-cylinder diesel. The manufacturer claimed 51.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

51.2 hp

38.2 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “AGCO GT 45”, claimed

Weight
5,333 lb
Hyd. flow
22.7 gpm
Top speed
24.9 mph

Agco GT-45 specs: key facts

  • The Agco GT-45 was built from 2004 to 2007.

  • The Agco GT-45 has a claimed engine power (gross or net not stated) of 38.2 kW (51.2 hp); it has no measured PTO figure.

  • The Agco GT-45 was offered in two-wheel-drive and four-wheel-drive versions.

  • The Agco GT-45 has a SAME-DEUTZ-FAHR 1000.3 engine, a 3-cylinder 3.00 L diesel unit.

  • The Agco GT-45 weighs 2,419 kg (5,333 lb) unladen.

  • The Agco GT-45 has an independent rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the Agco GT-45 delivers 85.9 L/min (22.7 gpm).

Source · Traktorenlexikon, “AGCO GT 45”

How much horsepower does a GT-45 have?

The only figure for the GT-45 is 51.2 hp (38.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
51.2 hp

Source · Traktorenlexikon, “AGCO GT 45”

What engine is in a GT-45?

A GT-45 has a SAME-DEUTZ-FAHR 1000.3, a 3-cylinder 3.00 L diesel engine.

Engine — GT-45 engine specifications
Make & modelSAME-DEUTZ-FAHR 1000.3
Cylinders3, air-cooled
Displacement183.0 ci · 3.00 L
Max torque151 lb·ft · 205 N·m
Electrical system12 V

Source · Traktorenlexikon, “AGCO GT 45”

How much will a GT-45 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the GT-45 are below.

Hydraulics & PTO — GT-45 hydraulics and PTO specifications
SystemOpen centre
Pump flow22.7 gpm · 85.9 L/min
Hitch categoryCategory 2
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 1,967 engine rpmEngages under load

Source · Traktorenlexikon, “AGCO GT 45”

What transmission does a GT-45 have?

Transmission specifications for the GT-45 are below.

Transmission — GT-45 transmission specifications
ClutchPedal-operated, dry single-disc clutch
Top speed24.9 mph · 40 km/h

Source · Traktorenlexikon, “AGCO GT 45”

How much does a GT-45 weigh?

A GT-45 weighs 5,333 lb (2,419 kg) unladen.

Weights & dimensions — GT-45 weights and dimensions
Unladen weight5,333 lb · 2,419 kg4 WD: 2,639
Wheelbase82.9 in · 2,105 mm4 WD: 2,056
Length145.7 in · 3,701 mm
Width70.4 in · 1,788 mm
Height103.6 in · 2,631 mm
Ground clearance17.5 in · 445 mm4 WD: 355
Front track54.6–66.4 in · 1,387–1,687 mm4 WD: 1,461-1,755
Rear track55.1–74.8 in · 1,400–1,900 mm
Turning radius, braked10.0 ft · 3.06 m4 WD: 3,650

Source · Traktorenlexikon, “AGCO GT 45”

Which tractors compare with a GT-45?

Within 10% of its 51.2 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a GT-45 two-wheel drive or four-wheel drive?

The Agco GT-45 was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a GT-45 have?

A GT-45 has a independent 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “AGCO GT 45”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: AGCO GT 45 — CC BY-SA 4.0, WIKIBOOKS-TL-122947 · revision 1088870. Wikibooks contributors (Traktorenlexikon). Original document