7 material differences · fewer than 12
Tractor oneAgco GT-452004–2007No measured PTO figureTractor twoCase-IH CS-521998–2001No measured PTO figure
Which should you choose?
Read our verdict on the GT-45 and the CS-52 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | GT-45 | CS-52 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 51.2 hp | 51.2 hp | — |
| Engine declared | SAME-DEUTZ-FAHR 1000.3 | PERKINS 903-27 T | differs |
| Displacement declared | 3.00 L | 2.70 L | +11% GT-45 |
| Maximum torque declared | 151 lb·ft · 205 N·m | 142 lb·ft · 193 N·m | +6% GT-45 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal-operated, dry single-disc clutch | dry double clutch, pedal-operated driving clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 22.7 gpm · 85.9 L/min | — | — |
| Pressure declared | — | 3,481 psi · 240 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,333 lb · 2,419 kg | 5,467 lb · 2,480 kg | — |
| Wheelbase declared | 82.9 in · 2,105 mm | 83.5 in · 2,121 mm | — |
| Length declared | 145.7 in · 3,701 mm | 140.6 in · 3,570 mm | — |
| Width declared | 70.4–87.8 in · 1,788–2,230 mm | 74.8 in · 1,900 mm | differs |
| Ground clearance declared | 17.5 in · 445 mm | — | — |
| Turning radius, braked declared | 10.0 ft · 3.06 m | — | — |
| Fuel tank declared | 94.8 qt · 89.7 L | 77.1 qt · 73.0 L | +23% GT-45 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Agco GT-45 sources
Source
- Source: Traktorenlexikon, “AGCO GT 45”
Case-IH CS-52 sources
Source
- Source: Traktorenlexikon, “Case-IH CS52/a”