- Rigid chassis
- WhichTractor size: Compact
- No lab test on file
- 2004–2007
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Agco GT-45 Hydraulics & PTO specs
13 hydraulics and PTO values on record for the GT-45.
Engine power, claimed · gross or net not stated
51.2 hp
38.2 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “AGCO GT 45”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does a GT-45 have?
Hydraulic and hitch specifications for the GT-45 are below.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 22.7 gpm · 85.9 L/min |
| Steering pump flow | 4.6 gpm · 17.5 L/min |
| Rear remote valves | 3 |
| Three-point hitch category | Category 2 |
| Lift capacity 610 mm behind ends | 3,521 lb · 1,597 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “AGCO GT 45”
What PTO does a GT-45 have?
A GT-45 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,967 rpm |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “AGCO GT 45”
Sources and how this page was built
13 hydraulics and PTO values from Traktorenlexikon, “AGCO GT 45”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: AGCO GT 45 — CC BY-SA 4.0, WIKIBOOKS-TL-122947 · revision 1088870. Wikibooks contributors (Traktorenlexikon). Original document