WhichTractor
  • Rigid chassis
  • WhichTractor size: Compact
  • No lab test on file
  • 1990–1993

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

CASE-INTERNATIONAL 495 (DT) specs: hp, weight, years

IHC D-179 three-cylinder diesel. The manufacturer claimed 51.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

51.2 hp

38.2 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case-IH 495”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
5,199 lb
3-point lift
3,704 lb
Hyd. flow
15.6 gpm
Top speed
18.6 mph

CASE-INTERNATIONAL 495 (DT) specs: key facts

  • The CASE-INTERNATIONAL 495 (DT) was built from 1990 to 1993.

  • The CASE-INTERNATIONAL 495 (DT) has a claimed engine power (gross or net not stated) of 38.2 kW (51.2 hp); it has no measured PTO figure.

  • The CASE-INTERNATIONAL 495 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

  • The CASE-INTERNATIONAL 495 (DT) has a IHC D-179 engine, a 3-cylinder 2.93 L diesel unit.Source 2

  • The CASE-INTERNATIONAL 495 (DT) weighs 2,358 kg (5,199 lb) unladen.

  • The CASE-INTERNATIONAL 495 (DT) has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the CASE-INTERNATIONAL 495 (DT) lifts 1,680 kg (3,704 lb) at the lower-link ends.

  • The hydraulic pump of the CASE-INTERNATIONAL 495 (DT) delivers 59.2 L/min (15.6 gpm).

Source · Traktorenlexikon, “Case-IH 495”

How does the 495 (DT) compare with its class?

  • Strength:

    A hydraulic pump flow of 59.2 L/min is high for its class — 117% above the median of 27.3 L/min across the 254 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 317 comparable records. How we work this out

Illustration of the 1990–1993 CASE-INTERNATIONAL 495 (DT), a 51 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 495 (DT) have?

The only figure for the 495 (DT) is 51.2 hp (38.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
51.2 hp

Source · Traktorenlexikon, “Case-IH 495”

What engine is in a 495 (DT)?

A 495 (DT) has an IHC D-179, a 3-cylinder 2.93 L diesel engine.

Engine — 495 (DT) engine specifications
Make & modelIHC D-179Source 2
Cylinders3, liquid-cooledSource 2
Displacement179.0 ci · 2.93 LSource 2
Max torque134 lb·ft · 182 N·m @ 1,400 rpm
InjectionDirect injection with Bosch inline injection pump and multi-hole nozzles
Electrical system12 V

Source · Traktorenlexikon, “Case-IH 495”

How much will a 495 (DT) lift, and what is its hydraulic flow?

A 495 (DT) lifts 3,704 lb (1,680 kg) at the lower-link ends.

Hydraulics & PTO — 495 (DT) hydraulics and PTO specifications
Pump flow15.6 gpm · 59.2 L/min
Lift at ends3,704 lb · 1,680 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 1,936 engine rpmEngages under load

Source · Traktorenlexikon, “Case-IH 495”

What transmission does a 495 (DT) have?

Transmission specifications for the 495 (DT) are below.

Transmission — 495 (DT) transmission specifications
ClutchPedal-operated dry single-disc clutch and hand lever operated wet multi-disc clutch
BrakesPedal-operated wet disc brake acting on differential side shafts
SteeringHydrostatic Danfoss steering with double-acting ZF steering cylinder
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Case-IH 495”

How much does a 495 (DT) weigh?

A 495 (DT) weighs 5,199 lb (2,358 kg) unladen.

Weights & dimensions — 495 (DT) weights and dimensions
Unladen weight5,199 lb · 2,358 kgDT: 2,762
Wheelbase79.1 in · 2,010 mm
Length136.0 in · 3,454 mm
Width66.0 in · 1,676 mm
Height93.5 in · 2,375 mm
Ground clearance22.1 in · 561 mmDT: 356
Front track52.0–72.1 in · 1,321–1,831 mmDT: 1,365-1,825
Rear track52.2–75.8 in · 1,325–1,925 mm
Turning radius, braked11.1 ft · 3.38 m

Source · Traktorenlexikon, “Case-IH 495”

What oil does a 495 (DT) take, and how much?

A 495 (DT) engine takes 8.0 qt (7.6 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

495 (DT) fluid capacities, grades and service intervals
SystemCapacity
Engine oil8.0 qt · 7.6 LSource: Traktorenlexikon, “Case-IH 495” · single source, not independently verified
Transmission36.0 qt · 34.1 LSource: Traktorenlexikon, “Case-IH 495” · single source, not independently verified
Front axle4.8 qt · 4.5 LSource: Traktorenlexikon, “Case-IH 495” · single source, not independently verified
Cooling system12.0 qt · 11.4 LSource: Traktorenlexikon, “Case-IH 495” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 495 (DT)?

Within 10% of its 51.2 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the CASE-INTERNATIONAL 495 (DT)

Is a 495 (DT) two-wheel drive or four-wheel drive?

The CASE-INTERNATIONAL 495 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 495 (DT) have?

A 495 (DT) has a independent 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Case-IH 495”; and Traktorenlexikon, “IHC 553”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case-IH 495 — CC BY-SA 4.0, WIKIBOOKS-TL-115475 · revision 1070430. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: IHC 553 — CC BY-SA 4.0, WIKIBOOKS-TL-25838 · revision 957516. Wikibooks contributors (Traktorenlexikon). Original document