9 material differences · fewer than 12

Tractor oneAgco GT-452004–2007No measured PTO figureTractor twoCase-IH 3220 (DT)1993–1998No measured PTO figure

Which should you choose?

Read our verdict on the GT-45 and the 3220 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Agco GT-45 and Case-IH 3220 (DT), field by field
Field	GT-45	3220 (DT)	Gap
Engine
Engine power, claimed claimed	51.2 hp	51.2 hp	—
Engine declared	SAME-DEUTZ-FAHR 1000.3	IHC D-179	differs
Displacement declared	3.00 L	2.93 L	—
Maximum torque declared	151 lb·ft · 205 N·m	134 lb·ft · 182 N·m	+13% GT-45
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6 mph · 30 km/h	+33% GT-45
Clutch declared	Pedal-operated, dry single-disc clutch	Pedal operated dry single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	22.7 gpm · 85.9 L/min	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,333 lb · 2,419 kg	5,897 lb · 2,675 kg	+11% 3220 (DT)
Wheelbase declared	82.9 in · 2,105 mm	79.8 in · 2,027 mm	—
Length declared	145.7 in · 3,701 mm	139.2 in · 3,535 mm	—
Width declared	70.4–87.8 in · 1,788–2,230 mm	72.4–90.6 in · 1,840–2,300 mm	—
Height, over the cab declared	103.6 in · 2,631 mm	93.5 in · 2,376 mm	+11% GT-45
Ground clearance declared	17.5 in · 445 mm	9.3 in · 236 mm	+89% GT-45
Turning radius, braked declared	10.0 ft · 3.06 m	11.5 ft · 3.50 m	+14% 3220 (DT)
Fuel tank declared	94.8 qt · 89.7 L	118.3 qt · 112.0 L	+25% 3220 (DT)

Source

Source