11 material differences · fewer than 12

Tractor oneAgco GT-452004–2007No measured PTO figureTractor twoCASE-INTERNATIONAL 495 (DT)1990–1993No measured PTO figure

Which should you choose?

Read our verdict on the GT-45 and the 495 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Agco GT-45 and CASE-INTERNATIONAL 495 (DT), field by field
Field	GT-45	495 (DT)	Gap
Engine
Engine power, claimed claimed	51.2 hp	51.2 hp	—
Engine declared	SAME-DEUTZ-FAHR 1000.3	IHC D-179	differs
Displacement declared	3.00 L	2.93 L	—
Maximum torque declared	151 lb·ft · 205 N·m	134 lb·ft · 182 N·m	+13% GT-45
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6 mph · 30 km/h	+33% GT-45
Clutch declared	Pedal-operated, dry single-disc clutch	Pedal-operated dry single-disc clutch and hand lever operated wet multi-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	22.7 gpm · 85.9 L/min	15.6 gpm · 59.2 L/min	+45% GT-45
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,333 lb · 2,419 kg	5,199 lb · 2,358 kg	—
Wheelbase declared	82.9 in · 2,105 mm	79.1 in · 2,010 mm	—
Length declared	145.7 in · 3,701 mm	136.0 in · 3,454 mm	+7% GT-45
Width declared	70.4–87.8 in · 1,788–2,230 mm	66.0 in · 1,676 mm	differs
Height, over the cab declared	103.6 in · 2,631 mm	93.5 in · 2,375 mm	+11% GT-45
Ground clearance declared	17.5 in · 445 mm	22.1 in · 561 mm	+26% 495 (DT)
Turning radius, braked declared	10.0 ft · 3.06 m	11.1 ft · 3.38 m	+10% 495 (DT)
Fuel tank declared	94.8 qt · 89.7 L	80.0 qt · 75.7 L	+18% GT-45

Source

Source