10 material differences · fewer than 12

Tractor oneFiat L 95 (DT)1996–1998No measured PTO figureTractor twoVALMET 6400-41991–2007No measured PTO figure

Which should you choose?

Read our verdict on the L 95 (DT) and the 6400-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat L 95 (DT) and VALMET 6400-4, field by field
Field	L 95 (DT)	6400-4	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	Fiat-Iveco 8045.25 K	VALMET 420 DS/420 DW/420 DWRE/44 ET	differs
Displacement declared	3.91 L	4.40 L	+13% 6400-4
Maximum torque declared	209 lb·ft · 284 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated dry single-plate clutch	—
Hydraulics & hitch
Pump flow declared	15.9 gpm · 60.0 L/min	18.0 gpm · 68.2 L/min	+14% 6400-4
Pressure declared	2,103–2,466 psi · 145–170 bar	—	—
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,496 lb · 3,400 kg	9,259 lb · 4,200 kg	+24% 6400-4
Maximum permissible mass declared	13,228 lb · 6,000 kg	16,535 lb · 7,500 kg	+25% 6400-4
Wheelbase declared	92.2 in · 2,342 mm	91.6 in · 2,326 mm	—
Length declared	157.5 in · 4,000 mm	173.5 in · 4,408 mm	+10% 6400-4
Width declared	79.5–105.7 in · 2,020–2,685 mm	78.1–101.8 in · 1,985–2,585 mm	—
Height, over the cab declared	100.4 in · 2,550 mm	107.7 in · 2,735 mm	+7% 6400-4
Ground clearance declared	19.7 in · 500 mm	18.1 in · 460 mm	+9% L 95 (DT)
Turning radius, braked declared	13.9 ft · 4.25 m	13.8 ft · 4.20 m	—
Fuel tank declared	121.5 qt · 115.0 L	174.4 qt · 165.0 L	+43% 6400-4

Source

Source