John Deere 2800 (A) vs VALMET 6400-4

9 material differences · fewer than 12

Tractor one

1993–1996

No measured PTO figure

Tractor two

1991–2007

No measured PTO figure

Which should you choose?

Read our verdict on the 2800 (A) and the 6400-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

John Deere 2800 (A) and VALMET 6400-4, field by field
Field	2800 (A)	6400-4	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	ZETOR 1001	VALMET 420 DS/420 DW/420 DWRE/44 ET	differs
Displacement declared	4.16 L	4.40 L	+6% 6400-4
Maximum torque declared	277 lb·ft · 376 N·m	—	—
Transmission
Top speed declared	18.6–21.7 mph · 30–35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Zetor single-disc clutch	Pedal-operated dry single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	11.3 gpm · 42.9 L/min	18.0 gpm · 68.2 L/min	+59% 6400-4
Pressure declared	2,350 psi · 162 bar	—	—
Three-point lift at ends declared	8,598 lb · 3,900 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,157 lb · 3,700 kg	9,259 lb · 4,200 kg	+14% 6400-4
Maximum permissible mass declared	16,535 lb · 7,500 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	93.5 in · 2,375 mm	91.6 in · 2,326 mm	—
Length declared	165.0 in · 4,190 mm	173.5 in · 4,408 mm	—
Width declared	76.8 in · 1,950 mm	78.1 in · 1,985 mm	—
Height declared	104.1 in · 2,645 mm	107.7 in · 2,735 mm	—
Ground clearance declared	11.0 in · 279 mm	18.1 in · 460 mm	+65% 6400-4
Turning radius, braked declared	12.7 ft · 3.87 m	13.8 ft · 4.20 m	+9% 6400-4
Fuel tank declared	111.0 qt · 105.0 L	174.4 qt · 165.0 L	+57% 6400-4

Source

Source