• WhichTractor size: Utility
  • Lab tested ×2
  • 2000–2004

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Renault Ceres 345 Full specifications

John Deere 4045 TRT 50 four-cylinder or JOHN DEERE 4045 TRT 50 diesel. OECD put one on a dynamometer and measured 79.0 hp at the power take-off — the number to size an implement from.

Measured at the PTO shaft

79.0 hp

Source · OECD Test 1977, measured

Drawbar hp
70.3
Hyd. flow
13.5 gpm

Renault Ceres 345 specs: key facts

  • The Renault Ceres 345 was built from 2000 to 2004 and produced 58.9 kW (79.0 hp) at the PTO, measured on OECD Test 1977.Source 2

  • The claimed engine power (gross or net not stated) of the Renault Ceres 345 is 64–64 kW (86–86 hp), depending on configuration.Source 4

  • The Renault Ceres 345 is four-wheel drive (4WD).Source 1,Source 2,Source 4

  • The Renault Ceres 345 has a John Deere 4045 TRT 50 engine, a 4-cylinder 4.53 L unit.Source 1

  • The Renault Ceres 345 weighs 3,680–3,875 kg (8,113–8,543 lb) unladen, depending on configuration.Source 4

  • The Renault Ceres 345 has an independent rear PTO running at 540/1000 rpm.Source 2,Source 4

  • The three-point hitch of the Renault Ceres 345 lifts 5,210 kg (11,486 lb) at the lower-link ends.Source 4

  • The hydraulic pump of the Renault Ceres 345 delivers 51.1 L/min (13.5 gpm).

Source · Traktorenlexikon, “Renault Ceres 345”

How much horsepower does a Ceres 345 have at the PTO?

At the PTO shaft a Ceres 345 has 79.0 hp (58.9 kW), measured on OECD Test 1977. The John Deere 4045 TRT 50 gave 79.0 hp at the PTO on Test 1970.

PTO, measured
79.0 hp
Drawbar, measured (unballasted)
70.3 hp

Sources · OECD test report 1977, 2002; Traktorenlexikon, “Renault Ceres 345”; Traktorenlexikon, “Renault Ceres 345X”; OECD test report 1970, 2001

What engine is in a Ceres 345?

A Ceres 345 has a John Deere 4045 TRT 50, a 4-cylinder 4.53 L engine. Diesel tractors have a JOHN DEERE 4045 TRT 50. Diesel tractors have a JOHN DEERE 4045 TRT 50. Diesel tractors have a JOHN DEERE 4045 TRT 50. Diesel tractors have a JOHN DEERE 4045 TRT 50.

Engine — Ceres 345 engine specifications
Make & modelJohn Deere 4045 TRT 50
Cylinders4, liquid-cooledSource 2
Displacement276.1 ci · 4.53 L
Aspirationsupercharged
Max torque244 lb·ft · 330.3 N·m @ 1,154 rpmSource 2
Injectiondirect injection / Direct injectionSource 3,Source 4On record for 2 of 6 configurations

Source · OECD test report 1970, 2001

How much will a Ceres 345 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the Ceres 345 are below.

Hydraulics & PTO — Ceres 345 hydraulics and PTO specifications
SystemConstant flowSource 4On record for 2 of 6 configurations
Pump flow13.5 gpm · 51.1 L/min
Hitch categoryCategory 2Source 4On record for 2 of 6 configurations
Lift at ends11,486 lb · 5,210 kgSource 4On record for 2 of 6 configurations
Rear PTO540/1000 rpmSource 2
PTO shaft34.9 mm, 6 splinesSource 2

Source · Traktorenlexikon, “Renault Ceres 345”

What transmission does a Ceres 345 have?

Transmission specifications for the Ceres 345 are below.

Transmission — Ceres 345 transmission specifications
ClutchDry LuK double clutchSource 4On record for 2 of 6 configurations
SteeringHydrostatic Danfoss steeringSource 4On record for 2 of 6 configurations
Top speed18.6–24.9 mph · 30–40 km/hSource 4On record for 2 of 6 configurationsthe article lists alternatives

Source · Traktorenlexikon, “Renault Ceres 345”

How much does a Ceres 345 weigh?

Dimensions for the Ceres 345 are below; no sourced weight is on record yet.

Weights & dimensions — Ceres 345 weights and dimensions
Unladen weight8,113–8,543 lb · 3,680–3,875 kgSource 4Varies by configuration: 3,680 kg, 3,700 kg, 3,735 kg or 3,875 kgOn record for 4 of 6 configurationstwo-wheel-drive versionfour-wheel-drive version
Maximum permissible mass12,919 lb · 5,860 kgSource 4On record for 2 of 6 configurations
Wheelbase95.8–97.2 in · 2,433–2,470 mmSource 4Varies by configuration: 2,433 mm or 2,470 mmOn record for 4 of 6 configurationstwo-wheel-drive versionfour-wheel-drive version
Length176.4 in · 4,481 mmSource 4On record for 2 of 6 configurations
Width73.2 in · 1,860 mmSource 4On record for 2 of 6 configurations
Height101.8 in · 2,586 mmSource 4On record for 2 of 6 configurations
Ground clearance16.5–19.3 in · 420–490 mmSource 4Varies by configuration: 420 mm or 490 mmOn record for 4 of 6 configurationstwo-wheel-drive versionfour-wheel-drive version
Rear track55.0–79.1 in · 1,398–2,010 mmSource 4On record for 2 of 6 configurations
Turning radius, braked12.5–13.3 ft · 3.80–4.05 mSource 4Varies by configuration: 3.80 m or 4.05 mOn record for 4 of 6 configurationstwo-wheel-drive versionfour-wheel-drive version

Source · Traktorenlexikon, “Renault Ceres 345”

What did OECD measure on Test 1977?

OECD Test 1977 recorded 79.0 hp at the PTO and 70.3 hp at the drawbar. Configuration as printed: “4 WD · M1032AA - 40 km/h”.

Test results — OECD Test 1977, Ceres 345: measured results
PTO power, maximum79.0 hp at 1,062 PTO rpm · 58.9 kW @ 2,249 engine rpm
PTO power, rated engine speed78.2 hp at 1,113 PTO rpm · 58.3 kW @ 2,356 engine rpm
PTO power, standard PTO speed78.6 hp at 1,000 PTO rpm · 58.6 kW @ 2,119 engine rpm
Drawbar power, unballasted70.3 hp · 52.4 kW

Source · OECD test report 1977, 2002

How much fuel does a Ceres 345 burn per hour?

Measured on OECD Test 1977 (tested as the Ceres 345 (4 WD)), at each condition the laboratory recorded.

1 other test of this model is on record; figures differ between configurations.

Cost per hour = fuel used per hour × your fuel price (per litre, or per US gallon for the gal/h figure).

Fuel use measured on OECD Test 1977
Test conditionFuel per hour
Maximum PTO powerPTO 58.9 kW (79.0 hp) at 1,062 rpm18.13 L/h 4.79 gal/h
Rated engine speedPTO 58.3 kW (78.2 hp) at 1,113 rpm18.75 L/h 4.95 gal/h
Standard PTO speedPTO 58.6 kW (78.6 hp) at 1,000 rpm17.52 L/h 4.63 gal/h
75% load, 50% loadNot on record for this test

Source · OECD Test 1977

Which tractors compare with a Ceres 345?

Within 10% of its 79.0 hp at the PTO (measured), the same type, and first built within 15 years of it.

Everything else people ask

Is a Ceres 345 two-wheel drive or four-wheel drive?

The Renault Ceres 345 is four-wheel drive (4WD).

What PTO does a Ceres 345 have?

A Ceres 345 has a 540/1000 rpm rear PTO on a 34.9 mm, 6 splines shaft.

What implements will a Ceres 345 run?

Size PTO implements from the measured 79.0 hp at the shaft.

Where this page comes from

Compiled from OECD tractor test reports 1970 and 1977; Traktorenlexikon, “Renault Ceres 345”; and Traktorenlexikon, “Renault Ceres 345X”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 2/1 970: Renault Ceres 345 X — Licence not stated by the publisher; facts cited, OECD-1970 · published 2001-10-09 · retrieved 2026-09-14. OECD; testing station Cemagref, Antony, France. Original document
  2. OECD Code 2 test report 2/1 977: Renault Ceres 345 — Licence not stated by the publisher; facts cited, OECD-1977 · published 2002-03-27 · retrieved 2026-09-14. OECD; testing station Cemagref, Antony, France. Original document
  3. Traktorenlexikon: Renault Ceres 345CC BY-SA 4.0, WIKIBOOKS-TL-109534 · revision 993434. Wikibooks contributors (Traktorenlexikon). Original document
  4. Traktorenlexikon: Renault Ceres 345XCC BY-SA 4.0, WIKIBOOKS-TL-109535 · revision 993435. Wikibooks contributors (Traktorenlexikon). Original document