11 material differences · fewer than 12

Tractor oneDeutz-Fahr AgroXtra 4.571990–1995No measured PTO figureTractor twoRenault Ceres 3452000–200479.0 hpMeasured at the PTO · OECD Test 1977

Which should you choose?

We will not advise between these two machines, because their power is not stated as the same quantity on both; the drive differs (4WD; Two-wheel or four-wheel drive); they were not built in overlapping years (1990–1995; 2000–2004). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

11 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroXtra 4.57 and Renault Ceres 345, field by field
FieldAgroXtra 4.57Ceres 345Gap
Measured performance
PTO power, measured measured—79.0 hp—
Drawbar power, measured measured—70.3 hp—
Engine
Engine declaredKHD BF4L 913John Deere 4045 TRT 50differs
Displacement declared4.09 L4.53 L+11% Ceres 345
Maximum torque declared251 lb·ft · 340 N·m244 lb·ft · 330.3 N·m—
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h18.6–24.9 mph · 30–40 km/h—
Clutch declaredIndependent dry double clutchDry LuK double clutchdiffers
Hydraulics & hitch
Hydraulic control declared—Constant flow—
Pump flow declared12.5 gpm · 47.3 L/min13.5 gpm · 51.1 L/min+8% Ceres 345
Rear PTO speeds declared540/1000/750 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared8,333 lb · 3,780 kg8,113–8,543 lb · 3,680–3,875 kg—
Maximum permissible mass declared14,551 lb · 6,600 kg12,919 lb · 5,860 kg+13% AgroXtra 4.57
Wheelbase declared96.1 in · 2,440 mm95.8–97.2 in · 2,433–2,470 mm—
Length declared165.9 in · 4,215 mm176.4 in · 4,481 mm+6% Ceres 345
Width declared73.6 in · 1,870 mm73.2–92.1 in · 1,860–2,340 mmdiffers
Ground clearance declared17.7 in · 450 mm16.5–19.3 in · 420–490 mmdiffers
Turning radius, braked declared14.2 ft · 4.32 m12.5–13.3 ft · 3.80–4.05 mdiffers
Fuel tank declared137.4 qt · 130 L158.5 qt · 150.0 L+15% Ceres 345

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Deutz-Fahr AgroXtra 4.57 sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”
  • Source: Traktorenlexikon, “Deutz-Fahr AgroXtra 4.57”

Renault Ceres 345 sources

Source
  • Source: OECD test report 1977, 2002
  • Source: OECD test report 1970, 2001
  • Source: Traktorenlexikon, “Renault Ceres 345”
  • Source: Traktorenlexikon, “Renault Ceres 345X”