10 material differences · fewer than 12

Tractor oneMassey Ferguson MF 3070 (A)1986–1993No measured PTO figureTractor twoRenault Ceres 3452000–200479.0 hpMeasured at the PTO · OECD Test 1977

Which should you choose?

We will not advise between these two machines, because their power is not stated as the same quantity on both; they were not built in overlapping years (1986–1993; 2000–2004). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

10 material differences · 4 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 3070 (A) and Renault Ceres 345, field by field
FieldMF 3070 (A)Ceres 345Gap
Measured performance
PTO power, measured measured—79.0 hp—
Drawbar power, measured measured—70.3 hp—
Engine
Engine power, claimed claimed88.8 hp——
Engine declaredPerkins AT 4.236 LJJohn Deere 4045 TRT 50differs
Displacement declared3.86 L4.53 L+17% Ceres 345
Maximum torque declared242 lb·ft · 328 N·m244 lb·ft · 330.3 N·m—
Transmission
Top speed declared18.6 mph · 30 km/h18.6–24.9 mph · 30–40 km/hdiffers
Clutch declaredPedal operated dry air-cooled VALEO single plate clutchDry LuK double clutchdiffers
Hydraulics & hitch
Hydraulic control declared—Constant flow—
Pump flow declared13.5 gpm · 51.1 L/min13.5 gpm · 51.1 L/min—
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared8,598 lb · 3,900 kg8,113–8,543 lb · 3,680–3,875 kgdiffers
Maximum permissible mass declared14,991 lb · 6,800 kg12,919 lb · 5,860 kg+16% MF 3070 (A)
Wheelbase declared96.9 in · 2,460 mm95.8–97.2 in · 2,433–2,470 mm—
Length declared159.4 in · 4,048 mm176.4 in · 4,481 mm+11% Ceres 345
Width declared74.4 in · 1,889 mm73.2–92.1 in · 1,860–2,340 mmdiffers
Ground clearance declared16.0 in · 407 mm16.5–19.3 in · 420–490 mmdiffers
Turning radius, braked declared—12.5–13.3 ft · 3.80–4.05 m—
Fuel tank declared182.8 qt · 173.0 L158.5 qt · 150.0 L+15% MF 3070 (A)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Massey Ferguson MF 3070 (A) sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson MF 3070”

Renault Ceres 345 sources

Source
  • Source: OECD test report 1977, 2002
  • Source: OECD test report 1970, 2001
  • Source: Traktorenlexikon, “Renault Ceres 345”
  • Source: Traktorenlexikon, “Renault Ceres 345X”