- WhichTractor size: Standard-size
- Not independently tested
- 1980–1985
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Massey Ferguson MF 2640 Full specifications
Perkins A 6.354-4 six-cylinder diesel or Perkins AT 6.354.4 diesel. The manufacturer claimed 102.6 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
102.6 hp
76.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 2640”, claimed
- Weight
- 11,729 lb
- Top speed
- 18.6 mph
Massey Ferguson MF 2640 specs: key facts
The Massey Ferguson MF 2640 was built from 1980 to 1985.
The Massey Ferguson MF 2640 has a claimed engine power (gross or net not stated) of 76.5 kW (102.6 hp); it has no measured PTO figure.
The Massey Ferguson MF 2640 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.Source 3
The Massey Ferguson MF 2640 has a Perkins A 6.354-4 engine, a 6-cylinder 5.80 L diesel unit.Source 4
The Massey Ferguson MF 2640 weighs 5,320 kg (11,729 lb) unladen.
The Massey Ferguson MF 2640 has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the Massey Ferguson MF 2640 lifts 4,500 kg (9,921 lb) at the lower-link ends.Source 3
The hydraulic pump of the Massey Ferguson MF 2640 delivers 53.3 L/min (14.1 gpm).Source 3
Source · Traktorenlexikon, “Massey Ferguson MF 2640”
_Massey_Ferguson_2640_in_Melk,_Austria.jpg){kind=link}
How much horsepower does an MF 2640 have?
The only figure for the MF 2640 is 102.6 hp (76.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Massey Ferguson MF 2640”
What engine is in an MF 2640?
An MF 2640 has a Perkins A 6.354-4, a 6-cylinder 5.80 L diesel engine. Diesel tractors have a Perkins AT 6.354.4.
| Make & model | Perkins A 6.354-4 |
|---|---|
| Cylinders | 6, liquid-cooledSource 2 |
| Displacement | 353.9 ci · 5.80 L |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Massey Ferguson MF 399”
How much will an MF 2640 lift?
Hydraulic and PTO specifications for the MF 2640 are below.
| Pump flow | 14.1 gpm · 53.3 L/minOn record for 1 of 3 configurations |
|---|---|
| Lift at ends | 9,921 lb · 4,500 kgOn record for 1 of 3 configurations |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 1,982 engine rpmSource 2Engages under load |
Source · Traktorenlexikon, “Massey Ferguson MF 2640 Turbo”
What transmission does an MF 2640 have?
Transmission specifications for the MF 2640 are below.
| Clutch | Pedal-operated dry and air-cooled single-plate clutch |
|---|---|
| Steering | Hydrostatic Danfoss steering with height and tilt adjustable steering wheel |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Massey Ferguson MF 2640”
How much does an MF 2640 weigh?
An MF 2640 weighs 11,729 lb (5,320 kg) unladen.
| Unladen weight | 11,729 lb · 5,320 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 107.3 in · 2,726 mmSource 3On record for 1 of 3 configurations |
| Length | 200.0 in · 5,080 mm |
| Width | 83.5 in · 2,120 mm |
| Height | 110.6 in · 2,810 mm |
| Ground clearance | 18.9 in · 480 mmSource 3On record for 1 of 3 configurations |
| Front track | 66.9–83.5 in · 1,700–2,120 mmtwo-wheel-drive version |
| Rear track | 63.8–87.4 in · 1,620–2,220 mmtwo-wheel-drive version |
| Turning radius, braked | 16.1 ft · 4.92 mSource 3On record for 1 of 3 configurations |
Source · Traktorenlexikon, “Massey Ferguson MF 2640”
Which tractors compare with an MF 2640?
Within 10% of its 102.6 hp of claimed engine power, the same type, and first built within 15 years of it.
- Fendt Favorit 611 S103.1 hp engine, claimed · 1972–1976Side by side with the MF 2640 →
- Fendt Favorit 611 SA103.1 hp engine, claimed · 1972–1976Side by side with the MF 2640 →
- Fendt Farmer 310103 hp engine, claimed · 1993–2001Side by side with the MF 2640 →
- Lamborghini R-1056 (DT)103.5 hp engine, claimed · 1977–1984Side by side with the MF 2640 →
- Landini R-9500 (DT) "TL 19 N/B"103.5 hp engine, claimed · 1973–1983Side by side with the MF 2640 →
- Hürlimann H-4105 Elite101.6 hp engine, claimed · 1989–1995Side by side with the MF 2640 →
Everything else people ask
Is an MF 2640 two-wheel drive or four-wheel drive?
The Massey Ferguson MF 2640 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does an MF 2640 have?
An MF 2640 has a independent 540/1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Massey Ferguson MF 2640 Turbo”; Traktorenlexikon, “Massey Ferguson MF 399”; Traktorenlexikon, “Massey Ferguson MF 1134”; and Traktorenlexikon, “Massey Ferguson MF 2640”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Massey Ferguson MF 1134 — CC BY-SA 4.0, WIKIBOOKS-TL-87006 · revision 992152. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Massey Ferguson MF 2640 — CC BY-SA 4.0, WIKIBOOKS-TL-87012 · revision 992137. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Massey Ferguson MF 2640 Turbo — CC BY-SA 4.0, WIKIBOOKS-TL-104350 · revision 992138. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Massey Ferguson MF 399 — CC BY-SA 4.0, WIKIBOOKS-TL-86702 · revision 1066509. Wikibooks contributors (Traktorenlexikon). Original document