13 material differences

Tractor oneFendt Favorit 510 C1993–2000No measured PTO figureTractor twoMassey Ferguson MF 26401980–1985No measured PTO figure

Which should you choose?

We will not advise between these two machines, because the drive differs (4WD; Two-wheel or four-wheel drive); they were not built in overlapping years (1993–2000; 1980–1985). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

13 material differences · 1 fields identical or within 5%, which is not counted as material

Fendt Favorit 510 C and Massey Ferguson MF 2640, field by field
FieldFavorit 510 CMF 2640Gap
Engine
Engine power, claimed claimed103.1 hp102.6 hp—
Engine declaredMWM TD 226. B-4Perkins A 6.354-4differs
Displacement declared4.16 L5.80 L+40% MF 2640
Maximum torque declared308 lb·ft · 417 N·m——
Transmission
Top speed declared24.9–31.1 mph · 40–50 km/h18.6 mph · 30 km/hdiffers
Clutch declaredWet multi-disc drive clutchPedal-operated dry and air-cooled single-plate clutchdiffers
Hydraulics & hitch
Hydraulic control declaredLoad sensing——
Pump flow declared26.9 gpm · 102.0 L/min14.1 gpm · 53.3 L/min+91% Favorit 510 C
Pressure declared2,901 psi · 200 bar——
Rear PTO speeds declared540 rpm / 1000 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared10,957 lb · 4,970 kg11,729 lb · 5,320 kg+7% MF 2640
Wheelbase declared91.9 in · 2,333 mm107.3 in · 2,726 mm+17% MF 2640
Length declared164.6 in · 4,180 mm200.0 in · 5,080 mm+22% MF 2640
Width declared89.8 in · 2,280 mm83.5 in · 2,120 mm+8% Favorit 510 C
Ground clearance declared21.1 in · 536 mm18.9 in · 480 mm+12% Favorit 510 C
Turning radius, braked declared13.1 ft · 4.00 m16.1 ft · 4.92 m+23% MF 2640
Fuel tank declared142.7 qt · 135 L240.9 qt · 228.0 L+69% MF 2640

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Favorit 510 C sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 510 C”
  • Source: Traktorenlexikon, “Fendt Farmer 308”

Massey Ferguson MF 2640 sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson MF 2640”
  • Source: Traktorenlexikon, “Massey Ferguson MF 399”
  • Source: Traktorenlexikon, “Massey Ferguson MF 2640 Turbo”