9 material differences · fewer than 12

Tractor oneFendt Favorit 611 S1972–1976No measured PTO figureTractor twoMassey Ferguson MF 26401980–1985No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (33%); the drive differs (2WD; Two-wheel or four-wheel drive); they were not built in overlapping years (1972–1976; 1980–1985). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

9 material differences · 5 fields identical or within 5%, which is not counted as material

Fendt Favorit 611 S and Massey Ferguson MF 2640, field by field
FieldFavorit 611 SMF 2640Gap
Engine
Engine power, claimed claimed103.1 hp102.6 hp—
Engine declaredMWM D 226-6Perkins A 6.354-4differs
Displacement declared6.23 L5.80 L+7% Favorit 611 S
Maximum torque declared267 lb·ft · 362 N·m——
Transmission
Top speed declared18.6 mph · 30 km/h18.6 mph · 30 km/h—
Clutch declaredair-cooled single-disc dry clutchPedal-operated dry and air-cooled single-plate clutchdiffers
Hydraulics & hitch
Pump flow declared9.9 gpm · 37.6 L/min14.1 gpm · 53.3 L/min+42% MF 2640
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared8,852 lb · 4,015 kg11,729 lb · 5,320 kg+33% MF 2640
Maximum permissible mass declared14,330 lb · 6,500 kg——
Wheelbase declared106.1 in · 2,696 mm107.3 in · 2,726 mm—
Length declared172.5 in · 4,382 mm200.0 in · 5,080 mm+16% MF 2640
Width declared91.9 in · 2,334 mm83.5 in · 2,120 mm+10% Favorit 611 S
Ground clearance declared18.1 in · 460 mm18.9 in · 480 mm—
Turning radius, braked declared13.8 ft · 4.21 m16.1 ft · 4.92 m+17% MF 2640
Fuel tank declared137.4 qt · 130 L240.9 qt · 228.0 L+75% MF 2640

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Favorit 611 S sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 611 S”
  • Source: Traktorenlexikon, “Fendt Favorit 612 S”

Massey Ferguson MF 2640 sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson MF 2640”
  • Source: Traktorenlexikon, “Massey Ferguson MF 399”
  • Source: Traktorenlexikon, “Massey Ferguson MF 2640 Turbo”