- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1978–1981
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Ford 8100 A Full specifications
Ford 2714 E six-cylinder diesel. The manufacturer claimed 103 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
103 hp
77 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Ford 8100”, claimed
- Weight
- 10,637 lb
- Hyd. flow
- 9.2 gpm
- Top speed
- 15.5 mph
Ford 8100 A specs: key facts
The Ford 8100 A was built from 1978 to 1981.
The Ford 8100 A has a claimed engine power (gross or net not stated) of 77 kW (103 hp); it has no measured PTO figure.
The Ford 8100 A is four-wheel drive (4WD).
The Ford 8100 A has a Ford 2714 E engine, a 6-cylinder 6.22 L diesel unit.
The Ford 8100 A weighs 4,825 kg (10,637 lb) unladen.
The Ford 8100 A has an independent rear PTO running at 540 rpm / 1000 rpm.
The hydraulic pump of the Ford 8100 A delivers 35.0 L/min (9.2 gpm).
Source · Traktorenlexikon, “Ford 8100”
How much horsepower does an 8100 A have?
The only figure for the 8100 A is 103 hp (77 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Ford 8100”
What engine is in an 8100 A?
An 8100 A has a Ford 2714 E, a 6-cylinder 6.22 L diesel engine.
| Make & model | Ford 2714 E |
|---|---|
| Cylinders | 6, liquid-cooled |
| Displacement | 379.8 ci · 6.22 L |
| Max torque | 274 lb·ft · 372 N·m @ 1,600 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Ford 8100”
How much will an 8100 A lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 8100 A are below.
| Pump flow | 9.2 gpm · 35.0 L/min |
|---|---|
| Hitch category | Category 2 |
| Rear PTO | Independent, 540 rpm / 1000 rpm @ 1,900 engine rpmEngages under load |
Source · Traktorenlexikon, “Ford 8100”
What transmission does an 8100 A have?
Transmission specifications for the 8100 A are below.
| Steering | Hydrostatic steering with adjustable steering wheel |
|---|---|
| Top speed | 15.5 mph · 25 km/h |
Source · Traktorenlexikon, “Ford 8100”
How much does an 8100 A weigh?
An 8100 A weighs 10,637 lb (4,825 kg) unladen.
| Unladen weight | 10,637 lb · 4,825 kg |
|---|---|
| Maximum permissible mass | 14,991 lb · 6,800 kg |
| Wheelbase | 114.8 in · 2,915 mm |
| Length | 181.7 in · 4,615 mm |
| Width | 79.1 in · 2,010 mm |
| Height | 114.2 in · 2,900 mm |
| Ground clearance | 22.8–26.5 in · 578–673 mm |
Source · Traktorenlexikon, “Ford 8100”
Which tractors compare with an 8100 A?
Within 10% of its 103 hp of claimed engine power, the same type, and first built within 15 years of it.
- Ford 7095 (A)103 hp engine, claimed · 1976–1981Side by side with the 8100 A →
- Fendt Farmer 310103 hp engine, claimed · 1993–2001Side by side with the 8100 A →
- Fendt Favorit 611 S103.1 hp engine, claimed · 1972–1976Side by side with the 8100 A →
- Fendt Favorit 611 SA103.1 hp engine, claimed · 1972–1976Side by side with the 8100 A →
- Fendt Favorit 510 C103.1 hp engine, claimed · 1993–2000Side by side with the 8100 A →
- Lamborghini R-1056 (DT)103.5 hp engine, claimed · 1977–1984Side by side with the 8100 A →
Everything else people ask
Is an 8100 A two-wheel drive or four-wheel drive?
The Ford 8100 A is four-wheel drive (4WD).
What PTO does an 8100 A have?
An 8100 A has a independent 540 rpm / 1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Ford 8100”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Ford 8100 — CC BY-SA 4.0, WIKIBOOKS-TL-88640 · revision 683113. Wikibooks contributors (Traktorenlexikon). Original document