• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1976–1981

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Ford 7095 (A) Full specifications

Ford 2714 E six-cylinder diesel. The manufacturer claimed 103 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

103 hp

77 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Ford 7095”, claimed

Weight
8,378 lb
Top speed
15.5 mph

Ford 7095 (A) specs: key facts

  • The Ford 7095 (A) was built from 1976 to 1981.

  • The Ford 7095 (A) was sold under the Ford badge and built by EVA.

  • The Ford 7095 (A) has a claimed engine power (gross or net not stated) of 77 kW (103 hp); it has no measured PTO figure.

  • The Ford 7095 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

  • The Ford 7095 (A) has a Ford 2714 E engine, a 6-cylinder 6.22 L diesel unit.Source 2

  • The Ford 7095 (A) weighs 3,800 kg (8,378 lb) unladen.

  • The Ford 7095 (A) has an independent rear PTO running at 540 rpm / 1000 rpm.

Source · Traktorenlexikon, “Ford 7095”

How much horsepower does a 7095 (A) have?

The only figure for the 7095 (A) is 103 hp (77 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
103 hp

Source · Traktorenlexikon, “Ford 7095”

What engine is in a 7095 (A)?

A 7095 (A) has a Ford 2714 E, a 6-cylinder 6.22 L diesel engine.

Engine — 7095 (A) engine specifications
Make & modelFord 2714 E
Cylinders6, liquid-cooledSource 1
Displacement379.8 ci · 6.22 L
Max torque274 lb·ft · 372 N·m @ 1,600 rpmSource 1

Source · Traktorenlexikon, “Ford 8100”

How much will a 7095 (A) lift?

Hydraulic and PTO specifications for the 7095 (A) are below.

Hydraulics & PTO — 7095 (A) hydraulics and PTO specifications
Hitch categoryCategory 2
Rear PTOIndependent, 540 rpm / 1000 rpmEngages under load

Source · Traktorenlexikon, “Ford 7095”

What transmission does a 7095 (A) have?

Transmission specifications for the 7095 (A) are below.

Transmission — 7095 (A) transmission specifications
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Ford 7095”

How much does a 7095 (A) weigh?

A 7095 (A) weighs 8,378 lb (3,800 kg) unladen.

Weights & dimensions — 7095 (A) weights and dimensions
Unladen weight8,378 lb · 3,800 kgtwo-wheel-drive version
Wheelbase100.4 in · 2,550 mmtwo-wheel-drive version
Length177.2 in · 4,500 mm
Width78.7 in · 2,000 mm
Height102.4 in · 2,600 mmtwo-wheel-drive version
Ground clearance21.3 in · 540 mmtwo-wheel-drive version
Front track56.0–88.1 in · 1,422–2,238 mm
Rear track56.0–80.0 in · 1,422–2,032 mm

Source · Traktorenlexikon, “Ford 7095”

Which tractors compare with a 7095 (A)?

Within 10% of its 103 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 7095 (A) two-wheel drive or four-wheel drive?

The Ford 7095 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

What PTO does a 7095 (A) have?

A 7095 (A) has a independent 540 rpm / 1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Ford 8100”; and Traktorenlexikon, “Ford 7095”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Ford 7095CC BY-SA 4.0, WIKIBOOKS-TL-90256 · revision 683156. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Ford 8100CC BY-SA 4.0, WIKIBOOKS-TL-88640 · revision 683113. Wikibooks contributors (Traktorenlexikon). Original document