9 material differences · fewer than 12
Tractor oneFord 7095 (A)1976–1981No measured PTO figureTractor twoMassey Ferguson MF 26401980–1985No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (40%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 7095 (A) | MF 2640 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 103 hp | 102.6 hp | — |
| Engine declared | Ford 2714 E | Perkins A 6.354-4 | differs |
| Displacement declared | 6.22 L | 5.80 L | +7% 7095 (A) |
| Maximum torque declared | 274 lb·ft · 372 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% MF 2640 |
| Clutch declared | — | Pedal-operated dry and air-cooled single-plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 14.1 gpm · 53.3 L/min | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,378 lb · 3,800 kg | 11,729 lb · 5,320 kg | +40% MF 2640 |
| Wheelbase declared | 100.4 in · 2,550 mm | 107.3 in · 2,726 mm | +7% MF 2640 |
| Length declared | 177.2 in · 4,500 mm | 200.0 in · 5,080 mm | +13% MF 2640 |
| Width declared | 78.7 in · 2,000 mm | 83.5 in · 2,120 mm | +6% MF 2640 |
| Ground clearance declared | 21.3 in · 540 mm | 18.9 in · 480 mm | +13% 7095 (A) |
| Turning radius, braked declared | — | 16.1 ft · 4.92 m | — |
| Fuel tank declared | — | 240.9 qt · 228.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 7095 (A) sources
- Source: Traktorenlexikon, “Ford 7095”
- Source: Traktorenlexikon, “Ford 8100”
Massey Ferguson MF 2640 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 2640”
- Source: Traktorenlexikon, “Massey Ferguson MF 399”
- Source: Traktorenlexikon, “Massey Ferguson MF 2640 Turbo”