• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1979–1981

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Leyland 282 Full specifications

LEYLAND-MOTORS 4/98 TT four-cylinder diesel. The manufacturer claimed 81.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

81.9 hp

61.1 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Leyland 282”, claimed

Weight
6,795 lb
3-point lift
5,199 lb
Hyd. flow
8.0 gpm
Top speed
18.6 mph

Leyland 282 specs: key facts

  • The Leyland 282 was built from 1979 to 1981.

  • The Leyland 282 has a claimed engine power (gross or net not stated) of 61.1 kW (81.9 hp); it has no measured PTO figure.

  • The Leyland 282 is two-wheel drive (2WD).

  • The Leyland 282 has a LEYLAND-MOTORS 4/98 TT engine, a 4-cylinder 3.77 L diesel unit.

  • The Leyland 282 weighs 3,082 kg (6,795 lb) unladen.

  • The Leyland 282 has an independent rear PTO running at 540 rpm.

  • The three-point hitch of the Leyland 282 lifts 2,358 kg (5,199 lb) at the lower-link ends.

  • The hydraulic pump of the Leyland 282 delivers 30.2 L/min (8.0 gpm).

Source · Traktorenlexikon, “Leyland 282”

How much horsepower does a 282 have?

The only figure for the 282 is 81.9 hp (61.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
81.9 hp

Source · Traktorenlexikon, “Leyland 282”

What engine is in a 282?

A 282 has a LEYLAND-MOTORS 4/98 TT, a 4-cylinder 3.77 L diesel engine.

Engine — 282 engine specifications
Make & modelLEYLAND-MOTORS 4/98 TT
Cylinders4, liquid-cooled
Displacement230.1 ci · 3.77 L
Max torque207 lb·ft · 281 N·m @ 1,600 rpm
InjectionDirect injection method with CAV injection pump
Electrical system12 V

Source · Traktorenlexikon, “Leyland 282”

How much will a 282 lift, and what is its hydraulic flow?

A 282 lifts 5,199 lb (2,358 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 282 hydraulics and PTO specifications
Pump flow8.0 gpm · 30.2 L/min
Hitch categoryCategory 2
Lift at ends5,199 lb · 2,358 kg
Rear PTOIndependent, engine-driven, 540 rpm @ 1,813 engine rpmEngages under load
PTO shaft1 3/8" - 6 splines

Source · Traktorenlexikon, “Leyland 282”

What transmission does a 282 have?

Transmission specifications for the 282 are below.

Transmission — 282 transmission specifications
ClutchDry Borg and Beck double clutch
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Leyland 282”

How much does a 282 weigh?

A 282 weighs 6,795 lb (3,082 kg) unladen.

Weights & dimensions — 282 weights and dimensions
Unladen weight6,795 lb · 3,082 kg
Wheelbase80.0 in · 2,032 mm
Length146.9 in · 3,730 mm
Width80.3 in · 2,040 mm
Height98.8 in · 2,510 mm
Ground clearance15.8 in · 402 mm
Front track52.0–76.1 in · 1,321–1,932 mm
Rear track62.0–70.0 in · 1,575–1,778 mm
Turning radius, braked10.7 ft · 3.27 m

Source · Traktorenlexikon, “Leyland 282”

Which tractors compare with a 282?

Within 10% of its 70.8 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 282 two-wheel drive or four-wheel drive?

The Leyland 282 is two-wheel drive (2WD).

What PTO does a 282 have?

A 282 has a independent 540 rpm rear PTO on a 1 3/8" - 6 splines shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Leyland 282”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Leyland 282CC BY-SA 4.0, WIKIBOOKS-TL-116108 · revision 993762. Wikibooks contributors (Traktorenlexikon). Original document